HM-32 - Mill Drill Machine Package Deal
(X) 540mm (Y) 190mm (Z) 410mm
Includes Metric Cutters, Clamp Kit, Collet Chuck & Stand
This is a rugged and well made machine with good capacities and plenty of power, a good choice for a serious home engineer.
The belt driven head provides a useful range of 12 speeds, 100-2080rpm and is quiet in operation, the head can be re-positioned on the column with the aid of a handle driven rack and pinion drive.
The table has three T slots to allow the work to be directly mounting to table, or in a milling vice, with two large diameter control hand wheels with metric calibrations for the longitudinal axis.
The fine down feed control can be locked firmly in position when milling and the mill also features an easy-to-read depth stop.
Optional power feed provides smooth variable speed drive to longitudinal travel
- Quiet B section belt drive system
- Milling head rotates 360º on column
- Extra large 820 x 240mm ground work table with T-slots
- Adjustable leadscrew nuts eliminating backlash on both axis
- Fine feed hand wheel operating quill feed
- Forward and reverse on/off switch
- 3MT spindle with 75mm diameter quill
- Adjustable table and drill length stops
- Rack and pinion wind-up head
- Rear slide-way cover and slide clamps on all axis
- Spindle lock for quill
- Table lock on both axis
- Metric dial graduations @ 0.05mm for X & Y axis
- Optional power feed fits straight on the table
- Machine stand (M135A)
- 14mm clamp kit set (C0965)
- Collet chuck set (C922B)
- 10 piece metric slot & end mill set (M3301)
- Drill chuck
- 3MT arbor
- 3MT-2MT drill sleeve
- Face cutter & arbor
- 3" tilting vice
- Safety cutter guard