Schools / TAFE OVS JM Oscillating Vertical Bobbin Sander

K8156 1 of 11

Tilt Table to 45 Degrees 2 of 11

Left View 3 of 11

100mm Dust Extraction 4 of 11

Table Tilt Scale 5 of 11

Sanding Spindle Holders on Right Side 6 of 11

Sanding Spindle Holders on Left Side 7 of 11

Start Stop Switch 8 of 11

Key Lockable Switch 9 of 11

Side View 10 of 11

Sanding Spindles Table Inserts and Spanners 11 of 11

Description

Ø6.35mm (1/4") to Ø101.6mm (4")

Quality Taiwanese manufacture
Used for sanding deep and wide work pieces, front edges, narrow inner curves, horizontal, vertical, diagonal, with or across the grain
Rotating and oscillating action ensures exceptional finishing results
Precision ground cast iron tilting table 609 x 609mm
Heavy gauge steel frame construction
Table tilting mechanism allows a tilt from 0° to 45°
Supplied with 10 bobbin spindles ranging from Ø6.35mm (1/4") to Ø101.6mm (4")
Supplied with table inserts with round and oval openings for various sanding positions
Spindle change is easily made by using the supplied wrench
On-board accessory storage ensures convenient storage of all drums and table inserts plates
1hp 240V motor provides ample power
Ø100mm (4") dust port for efficient dust extraction
Oscillating per minute: 75 times

Guarding installed underneath worktable to ensure maximum operator safety when table is tilted
DOL starter switch with overload protection and raised red stop button
Keyed isolation switch - PWD approved
Test and tag certificate on 240V lead

Specifications

Accessories

Downloads