BuildPro D-Stop Bars
  • 1 of 6
  • 2 of 6
    Use the Round End of the D Stop Bar to Hold Against Curved or Odd Shaped Stock
  • 3 of 6
    The Spring Loaded Pin Provides Variable Pressure for the Quick Locating Placement and Removal of Stock
  • 4 of 6
    Use the Side of the D Stop Bar as a Stop
  • 5 of 6
    Use as a Spacer to Elevate the Workpiece
  • 6 of 6
    Toggle Clamps Can Be Mounted on Top of the D Stop Bars
Order Code: W08081
T60625 - BuildPro D-Stop Bars
98 x 25 x 25mm
70mm Stroke Length
Only Available From: Sydney
Additional Freight Charges May Apply
On Special - While Stocks Last
ex GST
inc GST

D-Stop Bar
98 x 25 x 25mm
Nett Weight (kg)
Unique and versatile D-Stop Bars, with spring loaded plungers, are an efficient way to locate and position stock against a stop.

*12.7 mm and 25 mm thicknesses configurations for use as spacers.

The D-Stop Bars are "distortion tolerant", for welded structures allowing easy part removal. They consist of a rounded end into position with Ball Lock Bolts, or Socket Head Shoulder Screws. Use the round end to locate any round or irregular shaped parts. Full length slots give you numerous mounting positions.

- Use the side of the D-Stop Bar as a stop. Mount Clamps, such as Toggle Clamps, on D-Stop Bars to clamp at varying heights.
- Use the D-Stop Bar as spacers to elevate the workpieces. D-Stop Bars can be clamped to the BuildPro® Tabletop using Ball Lock Bolts.
- The spring loaded pin provides variable pressure for the quick locating, placement, and removal of stock.
- Use the round end of the D-Stop Bar to hold against curved or odd shaped stock.

The Anodized Aluminum D-Stop Bars are lightweight and easy to use maneuver. Mount D-Stop Bars using M10 hex head screw. Must be used with Threaded Adaptors, (sold separately) Part Nos. TXT6204 or TXT6304.

The very practical, modular design of the BuildPro® Table makes it easy to set-up and tear down for job at hand, big or small. Save time and money by holding, positioning and locating quickly and easily with a wide variety of BuildPro® clamps and accessories.

All BuildPro® Tables have 16mm thick steel plate with Ø16mm holes in a 50mm grid pattern. All tables, except BuildPro® MAX, have 40mm slots between plates.
  • 98 x 25 x 25mm
  • 70mm slot Length
  • 2 x M4 Threaded Holes
  • 16.5mm Threaded Hole Distance
  • 2 x Threaded holes are for mounting toggle clamps & accessories

Product Brochure
2014 Metric BuildPro Brochure
9.46 MB
  • T60625 (W08081)
Table Height with Stand (mm)
Suits Table Size
Material Finish
Clamping Capacity
Locking Handle - Pivot Movement
Clamp Bar - Pivot Movement
Plunger Travel (mm)
Throat Depth (mm)
Opening (mm)
Quantity Per Pack (No.)
Number of Holes (No.)
Slot Length (mm)
Magnet Clamp Angle (deg)
Pull Force (kg)
Clamping Force (kg)
Over all Length
Nett Weight (kg)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.