Hydraulic Punch & Shear
  • 1 of 29
  • 2 of 29
    Machine Capabilities
  • 3 of 29
    Includes large hole punching up to 50mm Diameter
  • 4 of 29
    Includes Auto Touch & Cut Length Stop
  • 5 of 29
    Includes Hydraulic Holddown for Flat Shear
  • 6 of 29
    Flat Bar Shear
  • 7 of 29
    Square Bar Shear
  • 8 of 29
    Round Bar Shear
  • 9 of 29
    Angle Shear
  • 10 of 29
    Angle Shear
  • 11 of 29
    Angle Shear
  • 12 of 29
    Angle Shear
  • 13 of 29
    Angle Shear
  • 14 of 29
  • 15 of 29
    Work Light
  • 16 of 29
    Monoblock Design For Rigid Frame Structure
  • 17 of 29
    Keyed Punch Ram For Shaped Tool Alignment
  • 18 of 29
    Solid Punching Base With T-Slot Grooves
  • 19 of 29
    Optional Single Vee Pressbrake Attachment
  • 20 of 29
    Optional Multi Vee Preesbrake
  • 21 of 29
    Optional Vee Notcher Punch Side
  • 22 of 29
    Optional Channel Shear
  • 23 of 29
    Optional Pipe Notcher
  • 24 of 29
    Optional Channel Punching Die Holder
  • 25 of 29
    Optional Goose Neck Die Holder
  • 26 of 29
    Optional Large Hole Punching
  • 27 of 29
    Optional Angle Bending Press
  • 28 of 29
    Optional Multi Stop Gauge
  • 29 of 29
    Optional Duplicating Table
Order Code: P178H
IW-165SDH - Hydraulic Punch & Shear (415V)
165 Tonne, Dual Independent Operation
Includes Hydraulic Plate Clamping, Auto Touch & Cut Systems & 6 Sets of Round Punches & Dies
Punching Pressure (Tonne)
Punching Table Type
Manual with Guides and
Adjustable Stops
Punching (Diameter x Thickness) (mm)
Ø7 x 32, Ø50 x 24
Punching Throat Depth (mm)
Punching Maximum Stroke Length (mm)
Punching Cycles (15mm Stroke) - MS (cpm)
Flat Bar Shear (W x Thickness) - MS (mm)
760 x 20, 400 x 30
Flat Bar Shear - Blade Length - MS (mm)
Angle Shear 90º - MS (mm)
205 x 205 x 20
Angle Shear 45º - MS (mm)
80 x 80 x 10
Round Solid Bar Shear - MS (mm)
Square Solid Bar Shear - MS (mm)
60 x 60
Notching - Rectangle - MS (mm)
63.5 x 90 x 16
Motor Power (kW / hp)
15 / 20
Voltage / Amperage (V / amp)
Nett Weight (kg)
Manufactured in Taiwan

The double cylinder "S/SD" series are in the Sunrise tradition of well engineered ironworkers built for high power, quality, & reliability. These ironworkers have two control foot pedals, & separate operations can be safely performed simultaneously without interference. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke & deep throat enable mounting a wide range of special equipment. The large punching base with the "T-slot" fixing provide a solid base for securing the punching tooling, as well as a wide range of optional & custom designed tooling.

Sunrise Fluid Power Inc. has been manufacturing hydraulic products for more than 20 years. Sunrise products includes hydraulic ironworkers (steelworkers), hydraulic punching machines, bending machines, cylinders, & more. Sunrise is ISO-9001 certified by BVQI & meet all CE safety requirements & regulations. Sunrise Fluid Power is dedicated to research and development. In 2000 Sunrise introduced new series ironworkers, punching machines, & CNC controlled positioning tables. In 2002, Sunrise further introduced new lines of sheet metal punching machines & horizontal bending machines. Currently Sunrise has the broadest range of ironworker & punching machine models compared to any other manufacturer & continue to offer new products to suit market demands.

Large hole punching up to Ø50mm as standard
Overhang bolster for punching channel & beam flanges
Large ruled support table with removable front section for leg down punching in angle or section
Easily adjustable stripper & safety guard
  • Five work stations, Punching, Notching, Plate Shearing, Angle Iron Shearing and Bar Shearing (all stations are guarded)
  • Dual hydraulic cylinders allows simultaneous operation without interference
  • Punching capacity up to 50mm standard
  • Mitre cutting of angle iron
  • Magnetic base halogen lamp
  • Hydraulic system is protected with replaceable filter cartridge
  • Adjustable stroke for faster punching
  • Curved shear blade for minimal job distortion
  • Most cutting blades are four-sided for long life
  • Punch, shear & notching table fitted with stops & guides as standard
  • Two-pedal operation allows two people to work machine to greatly speed up production
  • Large punch table with multi-purpose bolster, featuring a removable block for channel and beam flange punching
  • Adjustable length stop with one-touch electronic backgauge for greater efficiency in repetitious work
  • Includes hydraulic hold down plate clamping

  • Pre-Commissioning:
  • 1. Punch & Shear is run & tested prior delivery
  • 2. Hydraulic oil is included with machine
  • 6 sets of round punches & dies:
  • Punches: 20, 22, 24, 26, 28 & 30mmm
  • Dies: 20.7, 23.2, 25.2, 27.2, 29.2 & 31.2mmm
  • Full safety guarding at all workstations
  • Tooling to all workstations
  • Punch, Shear & Notch support tables
  • Now with Quick Change Tooling
  • 1 metre adjustable "Auto touch length stop" once the material has pushed the micro-switch stop the hydraulic system is activated to shear work piece
  • Hydraulic Hold Down Plate Clamping
Optional Accessories
  • Punch & dies are available in Round, Square, Rectangle & Oblong shapes

Product Brochure
95.22 KB
Instruction Manual
8.5 MB
Punch and Shears Factory Brochure
5.99 MB
Select your Postcode & Suburb to estimate the delivery fee for this product.
Postcode & Suburb:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • IW-165SDH (P178H)
Punching Pressure (Tonne)
Punching Table Type
Punching (Diameter x Thickness) (mm)
Punching Throat Depth (mm)
Punching Maximum Stroke Length (mm)
Punching Cycles (15mm Stroke) - MS (cpm)
Punching Work Table Height (mm)
Flat Bar Shear (W x Thickness) - MS (mm)
Flat Bar Shear - Blade Length - MS (mm)
Flat Bar Shear Work Table Height (mm)
Angle Shear 90º - MS (mm)
Angle Shear 45º - MS (mm)
Angle Flange Trim (mm)
Angle Shear Work Table Height (mm)
Round Solid Bar Shear - MS (mm)
Square Solid Bar Shear - MS (mm)
Solid Bar Shear Work Table Height (mm)
Notching - Rectangle - MS (mm)
Notching Work Table Height (mm)
Motor Power (kW / hp)
Voltage / Amperage (V / amp)
Nett Weight (kg)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.
Parts List
3.43 MB