THIS PRODUCT IS NO LONGER AVAILABLE. Click to see recommended item > L681 (AL-335F)
Centre Lathe
  • 1 of 28
  • 2 of 28
  • 3 of 28
    Speed Levers
  • 4 of 28
    Spindle Speed Chart
  • 5 of 28
  • 6 of 28
    Feed and Thread Gearbox
  • 7 of 28
    Metric Feed Chart
  • 8 of 28
    Imperial Feed Chart
  • 9 of 28
    Metric and Imperial Thread Charts
  • 10 of 28
    Indicator Table
  • 11 of 28
    Chuck Guard
  • 12 of 28
    3 Point Steady
  • 13 of 28
    2 Point Steady
  • 14 of 28
    Halogen Light
  • 15 of 28
  • 16 of 28
    Saddle Left View
  • 17 of 28
  • 18 of 28
    Compound Slide
  • 19 of 28
    Thread Chasing Dial
  • 20 of 28
    Forward Reverse Spindle Lever
  • 21 of 28
    Feed Engagement Lever
  • 22 of 28
    Compound Slide Hand Wheel
  • 23 of 28
    Cross Feed Handle
  • 24 of 28
    Saddle Hand Wheel
  • 25 of 28
  • 26 of 28
    Tailstock Quill
  • 27 of 28
    Tailstock Handle
  • 28 of 28
    Induction Hardened Bedways
Order Code: L183
AL-335 - Centre Lathe (240V)
300 x 910mm Turning Capacity
Includes Cabinet Stand
Swing Over Bed (mm)
Distance Between Centres (mm)
Spindle Bore (mm)
Swing In Gap (mm)
Swing Over Cross-slide (mm)
Digital Readout System Fitted
Quick Change Toolpost Fitted
Tool Height To Suit (mm)
Centre Height (mm)
Spindle Nose Size or Type
D1-4 Camlock
Bed Width (mm)
Headstock Spindle Taper (MT)
Tailstock Taper (MT)
Cross Slide Travel (mm)
Compound Slide Travel (mm)
Leadscrew Type
Imperial Cross Feed (X-Axis) (inch/rev)
0.014 - 0.344
Imperial Longitudinal Feed (Z-Axis) (inch/rev)
0.05 - 1.29
Metric Thread Steps & Pitch (No. / mm)
36 (0.4 - 7)
Imperial Thread Steps & TPI (No. / TPI)
36 (4 - 60)
3 Jaw Chuck Diameter (mm)
4 Jaw Chuck Diameter (mm)
Spindle Steps / Speeds (No. / rpm)
9 (75 - 1400)
Motor Power (kW / hp)
1.5 / 2
Voltage / Amperage (V / amp)
240 / 10
Nett Weight (kg)
A high quality specification, floor standing, heavy duty metal turning lathe suitable for the enthusiastic home model engineer, general maintenance and small work shops. Featuring a precision ground, induction hardened bed, fully gear driven spindle with hardened and ground gears with a speed range of 75 - 1400rpm, selectable via the front of headstock mounted gear selection levers.

2hp single phase 240 volt motor is supplied on machine, taper roller spindle bearings, range of cross and longitudinal feed speeds selected on a separate gearbox, thread chasing dial, chuck guard with safety interlock, splash guard and work lamp.

Supplied with a large range of standard accessories including a 150mm(6") 3 jaw self centring chuck, 200mm(8") 4 jaw independent chuck, face plate and dead centres. 5 to 3 MT reduction sleeve, steady rest, follow rest, standard tool post, floor stand with a swarf tray. Change gears and toolbox with maintenance tools.
  • Gear driven headstock for quick change of spindle speeds
  • Precision V-beds are induction hardened and ground, incorporated with rigid webbed castings
  • Low voltage halogen work light
  • Change gears for metric and imperial thread cutting
  • Adjustable taper roller bearings support the spindle
  • 9 spindle speeds from 75 to 1400rpm
  • Saddle hand wheel mounted on right side of apron reducing swarf contacting the hand
  • Inching button is incorporated on the control panel for convenient spindle speed selection
  • Quick-action gearbox for thread cutting and auto feeding
  • D1-4 camlock spindle for quick and accurate chuck removal and safe reverse direction turning. ISO standard
  • External adjustable cross feed lead-screw nut
  • Powered longitudinal and cross feeds
  • Bed wipers on saddle
  • Removable gap bed-way for larger diameter jobs
  • Dual calibrated dials (except for saddle hand-wheel)
  • Chuck guard fitted with safety micro switch
  • Chuck & change gear guards are fitted with micro switches
  • 3-jaw chuck with reverse jaws
  • 4-jaw chuck
  • Face plate
  • Fixed steady
  • Travelling steady
  • Change gears
  • Dead centre
  • Thread-chasing dial
  • Rear splash guard & swarf tray
  • Safety chuck guard
  • Cabinet stand
  • Spanners
  • Tool box
  • Instruction booklet
Product Brochure
Instruction Manual
3.43 MB
Spare Parts Ordering
To assist you in ordering your spare part quicker than ever before, we have listed our most common spare parts to suit our Hafco Machinery for purchase online. Just choose between the 2 options outlined below, to find exactly what you are looking for. If you need further assistance please contact us.
Option 1
Browse through the "Common Spare Parts" tab below . Once you have identified your part, you can add it to your cart by clicking on the "+ ADD TO CART" button. If you wish to add multiples of this part you can either click the "+ ADD TO CART" button as many times as you like or click on the "VIEW CART" button and change the order quantity, prior to completing your order.
Option 2
If your part is NOT listed in the "Common Spare Parts" tab below , click the "MORE INFO" button to complete the "Spare Parts Enquiry Form".
This will provide you with the option to email your spare part enquiry direct to our Spare Parts and Service Department, or if you wish, you can download a printable version of this enquiry form which will include a copy of the Parts List to suit this machine (if available). Further instructions for the return email address or fax number of this printable form is provided on the document for your convenience.
NOTE: Please remember to clearly identify your part on the included parts diagram if necessary so that we can respond as quickly as possible with a price and availability for the part(s) you require.
Parts List
2.54 MB