THIS PRODUCT IS NO LONGER AVAILABLE. Click to see recommended item > M579 (HM-54GV)
HM-52G Geared Head Turret Milling Machine - Includes Tooling Package
  • 1 of 16
  • 2 of 16
    Geared Head Spindle Speed Selectors
  • 3 of 16
    Horizontal Spindle
  • 4 of 16
    Spindle Speed Chart
  • 5 of 16
    Tilting Head Scale
  • 6 of 16
    Adjustable Swivel and Sliding Ram
  • 7 of 16
    Concertina Slide Way Cover
  • 8 of 16
    Swivel Table and Feed Limit Switches
  • 9 of 16
    Horizontal Speed Spindle Chart
  • 10 of 16
    Vertical Spindle Switch
  • 11 of 16
    Knee Feed Handle
  • 12 of 16
    Horizontal Spindle Support
  • 13 of 16
    Halogen Light
  • 14 of 16
    Horizontal Spindle Switch
  • 15 of 16
    Coolant Pump
  • 16 of 16
    Accessories Included, Metric Collet Chuck, Drill Chuck and Arbor, Morse Taper Adaptors
Order Code: K8744
QLD Schools / TAFE - HM-52G Geared Head Turret Milling Machine - Includes Tooling Package (415V)
(X) 600mm (Y) 220mm (Z) 340mm
QLD Contract Item No. 16.3
QLD Contract No.
QLD Item No. 16.3
Schools / TAFE HM-52G
Digital Readout
Drilling Capacity (mm)
End Milling Capacity (mm)
Face Milling Capacity (mm)
Spindle Taper
Quill Travel / Diameter (mm)
125 / 90
Ram Stroke (mm)
Spindle to Table (mm)
Type of Slides
Spindle to Column (mm)
Table Size (mm)
1000 x 240
T-Slot (mm)
Longitudinal Travel (X-Axis) (mm)
Cross Travel (Y-Axis) (mm)
Vertical Travel (Z-Axis) (mm)
Work Table Load Capacity (kg)
Swivel Head (Left - Right)
Power Feed Longitudintal (X-Axis) (mm/min)
Power Feed Cross (Y-Axis)
Power Feed Vertical (Z-Axis)
Quill Feed Rate/Rev (mm/rev)
Spindle Speeds (Vertical) (No. / rpm)
8 (115-1750rpm)
Spindle Speeds (Horizontal) (No. / rpm)
9 (60-1350rpm)
Motor Power (Vertical) (kW / hp)
1.5 / 2
Motor Power (Horizontal) (kW / hp)
1.5 / 2
Motor Voltage (V / amp)
Nett Weight (kg)
We for many years have been working in close consultation with education departments to ensure the most suitable equipment is provided to our schools and TAFE, not only does it comply with the departments stringent safety requirements but is built to last the distance. That's why we consider our company to be a specialist when it comes to supplying quality Wood Work and Metal Working Machinery for Public or Private Schools, TAFE Colleges and Trade Training Centres in all states of Australia.

A well-built entry level geared head, turret milling, vertical and horizontal, drilling machine with a powerful continuous-load 1.5 kw motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 220mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. Two levers mounted on right side of milling head enables quick change off the geared spindle speeds.

Other features include taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 6 piece metric collet chuck set, coolant system, 150mm machine vice, drill chuck, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.
  • Swivel table & two arbors for the Horizontal spindle
  • Geared head for vertical spindle speeds
  • Tilting head ±90º left to right.
  • 340mm horizontally sliding and rotating ram
  • NT30 Horizontal and vertical spindles that are hardened and ground
  • Precision-ground dovetail slide-ways and table
  • Precision milling table incorporating machined T slots
  • Rear concertina slide-way cover
  • Forward and reverse on/off switch
  • Fine hand wheel operated quill feed
  • Swarf & splash tray
  • Spindle lock for quill
  • Metric dial graduations @ 0.02mm for X , Y & Z-Axis
  • Vertical dial graduations on hand wheel @ 0.05mm
  • All slides utilise dovetail construction for maximum rigidity
  • Swarf Tray
  • Coolant system
  • Halogen lamp
  • 2 & 3MT adaptors
  • 150mm Machine Vice (V106)
  • 75mm Face Mill Cutter (M512)
  • NT30 x 27mm Face Mill Arbor (M542)
  • Pkt of 10 Milling Inserts (L066)
  • NT30 x 6 Piece Collet Chuck Set (C9245)
  • 6-20mm Metric End Mill & Slot Drill Set (M330)
  • 10mm T Slot Cutter (M3280)
  • 12mm T Slot Cutter (M3281)
  • 14mm Clamp Kit (C096)
  • 16mm Keyless Drill Chuck (C294)
  • NT30 Drill Chuck Arbor (D451)
  • 128mm- BS-1 Dividing Head (D002)
  • 150mm 3 Jaw Lathe Chuck (C203)
Product Brochure
1.08 MB
Spare Parts Ordering
To assist you in ordering your spare part quicker than ever before, we have listed our most common spare parts to suit our Hafco Machinery for purchase online. Just choose between the 2 options outlined below, to find exactly what you are looking for. If you need further assistance please contact us.
Option 1
Browse through the "Common Spare Parts" tab below . Once you have identified your part, you can add it to your cart by clicking on the "+ ADD TO CART" button. If you wish to add multiples of this part you can either click the "+ ADD TO CART" button as many times as you like or click on the "VIEW CART" button and change the order quantity, prior to completing your order.
Option 2
If your part is NOT listed in the "Common Spare Parts" tab below , click the "MORE INFO" button to complete the "Spare Parts Enquiry Form".
This will provide you with the option to email your spare part enquiry direct to our Spare Parts and Service Department, or if you wish, you can download a printable version of this enquiry form which will include a copy of the Parts List to suit this machine (if available). Further instructions for the return email address or fax number of this printable form is provided on the document for your convenience.
NOTE: Please remember to clearly identify your part on the included parts diagram if necessary so that we can respond as quickly as possible with a price and availability for the part(s) you require.