THIS PRODUCT IS NO LONGER AVAILABLE. Click to see similar products > Milling Machines TAFE
HM-48 Mill Drill Machine - Includes Tooling Package
  • 1 of 26
  • 2 of 26
    Left View
  • 3 of 26
    Tilting Head
  • 4 of 26
    Control Panel
  • 5 of 26
    Digital Tilting Head Gauge
  • 6 of 26
    Milling Head and Quill Handle
  • 7 of 26
    Digital Quill Depth Stop
  • 8 of 26
    Spindle Speed Controls
  • 9 of 26
    Speed Chart
  • 10 of 26
    Power Feed X Axis
  • 11 of 26
    Vertical Power Feed Motor
  • 12 of 26
    Manual Vertical Fine Feed Handle
  • 13 of 26
    Table Limit Switch
  • 14 of 26
    Motorised Head Safety Lock
  • 15 of 26
    Aluminum Motor
  • 16 of 26
    Swivel Head Adjustment
  • 17 of 26
    Dovetail Slide
  • 18 of 26
    Quill Depth Stop Gauge
  • 19 of 26
    Height Micro Limit Switch
  • 20 of 26
    Dial Graduations
  • 21 of 26
    Keyed Drill Chuck
  • 22 of 26
    Halogen Light
  • 23 of 26
    Flexible Coolant Hose
  • 24 of 26
    On Off Switch
  • 25 of 26
  • 26 of 26
    Includes these Accessories
Order Code: K8742
QLD Schools / TAFE - HM-48 Mill Drill Machine - Includes Tooling Package (240V)
(X) 540mm (Y) 185mm (Z) 410mm
QLD Contract Item No. 16.2
QLD Contract No.
QLD Item No. 16.2
Schools / TAFE HM-48
Digital Readout
Drilling Capacity (mm)
End Milling Capacity (mm)
Face Milling Capacity (mm)
Spindle Taper
Quill Travel / Diameter (mm)
120 / 75
Type of Slides
Spindle to Column (mm)
Table Size (mm)
820 x 240
T-Slot (mm)
Longitudinal Travel (X-Axis) (mm)
Cross Travel (Y-Axis) (mm)
Vertical Travel (Z-Axis) (mm)
Work Table Load Capacity (kg)
Position Accuracy (mm)
Swivel Head (Left - Right)
Power Feed Longitudintal (X-Axis) (mm/min)
0.02 - 0.20
Quill Feed Rate/Rev (mm/rev)
Spindle Speeds (Vertical) (No. / rpm)
6 (95-1600rpm)
Motor Power (Vertical) (kW / hp)
1.5 / 2
Motor Voltage (V / amp)
Nett Weight (kg)
We for many years have been working in close consultation with education departments to ensure the most suitable equipment is provided to our schools and TAFE, not only does it comply with the departments stringent safety requirements but is built to last the distance. That's why we consider our company to be a specialist when it comes to supplying quality Wood Work and Metal Working Machinery for Public or Private Schools, TAFE Colleges and Trade Training Centres in all states of Australia.

The HM-48 milling machines is similar in overall size to the popular RF-31 or HM-32 but with the additional benefit of a 6-speed 95-1600rpm, gear driven head which can be tilted up to 90º either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out.

The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling.

The motor is controlled by a standard forward and reverse on/off switch.
  • Gear driven head with 6 speeds
  • Dovetail vertical Z-Axis
  • Pendant control with swivel arm
  • Tilting head to ±90º from vertical with digital display
  • Large 820 x 240mm ground work table with T-slots
  • Adjustable leadscrew nuts eliminating backlash on both axis
  • Fine feed hand wheel operating quill feed
  • Digital depth display with zero reset for quill
  • Digital tilting head gauge
  • Longitudinal X-Axis power feed
  • Motorised head for Z-Axis travel
  • Forward and reverse on/off switch
  • 3MT spindle with 75mm diameter lockable quill
  • Adjustable table and drill length stops
  • Metric dial graduations @ 0.05mm for X & Y-Axis
  • Rear slide-way cover and slide clamps on all axis
  • Table lock on both axis
  • Heavy duty cast iron stand with coolant tray
  • Includes coolant system, swarf tray & work light
  • Cast iron stand
  • Coolant system
  • X-Axis power feed unit
  • Motorised vertical head motor
  • Digital tilting head gauge
  • Halogen light
  • Safety cutter guard
  • 125mm Machine Vice (V105)
  • 75mm Face Mill Cutter (M512)
  • MT3 x 27mm Face Mill Arbor (M563)
  • Pkt of 10 Milling Inserts (L066)
  • MT3 x 6 Piece Collet Chuck Set (C922B)
  • 6-20mm Metric End Mill & Slot Drill Set (M330)
  • 10mm T Slot Cutter (M3280)
  • 12mm T Slot Cutter (M3281)
  • 14mm Clamp Kit (C096)
  • 16mm Keyless Drill Chuck (C294)
  • MT3 Drill Chuck Arbor (D443A)
  • 100mm- BS-0 Dividing Head (D001)
  • 125mm 3 Jaw Lathe Chuck (C202)
Product Brochure
Spare Parts Ordering
To assist you in ordering your spare part quicker than ever before, we have listed our most common spare parts to suit our Hafco Machinery for purchase online. Just choose between the 2 options outlined below, to find exactly what you are looking for. If you need further assistance please contact us.
Option 1
Browse through the "Common Spare Parts" tab below . Once you have identified your part, you can add it to your cart by clicking on the "+ ADD TO CART" button. If you wish to add multiples of this part you can either click the "+ ADD TO CART" button as many times as you like or click on the "VIEW CART" button and change the order quantity, prior to completing your order.
Option 2
If your part is NOT listed in the "Common Spare Parts" tab below , click the "MORE INFO" button to complete the "Spare Parts Enquiry Form".
This will provide you with the option to email your spare part enquiry direct to our Spare Parts and Service Department, or if you wish, you can download a printable version of this enquiry form which will include a copy of the Parts List to suit this machine (if available). Further instructions for the return email address or fax number of this printable form is provided on the document for your convenience.
NOTE: Please remember to clearly identify your part on the included parts diagram if necessary so that we can respond as quickly as possible with a price and availability for the part(s) you require.