THIS PRODUCT IS NO LONGER AVAILABLE. Click to see similar products > Turret Milling Machines
Turret Milling Machine Package with Tooling Accessories
  • 1 of 15
  • 2 of 15
    Front View
  • 3 of 15
    Accessories Included Metric Collet Chuck Drill Chuck and Arbor Morse Taper Adaptors
  • 4 of 15
    Table Feed Limit Switches
  • 5 of 15
    X Axis Power Feed with Rapid
  • 6 of 15
    Quill Feed Handle and Fine Feed Dial
  • 7 of 15
    Tilting Head Scale
  • 8 of 15
    Adjustable Swivel and Sliding Ram
  • 9 of 15
    Spindle Speed Chart
  • 10 of 15
    Concertina Slide Way Cover
  • 11 of 15
    Coolant Pump
  • 12 of 15
    Halogen Light
  • 13 of 15
    Knee Feed Handle
  • 14 of 15
    Coolant Hose
  • 15 of 15
    Control Panel
Order Code: K027
HM-50 - Turret Milling Machine Package with Tooling Accessories (240V)
(X) 600mm (Y) 220mm (Z) 340mm
HM-50 Package
Digital Readout
Table Size (mm)
1000 x 240
Spindle Taper - Vertical
Longitudinal Travel (X-Axis) (mm)
Cross Travel (Y-Axis) (mm)
Vertical Travel (Z-Axis) (mm)
Type of Slides
Ram Travel (mm)
Spindle to Table (mm)
Quill Travel / Diameter (mm)
125 / 90
Throat Depth (max.) (mm)
Tilting Head (Left ~ Right)
Tilting Head (Forward ~ Back)
Power Feed - Quill (mm/rev)
Power Feed - Longitudinal (X-Axis) (mm/min)
20 - 2000
Power Feed - Cross (Y-Axis) (mm/min)
Power Feed - Vertical (Z-Axis) (mm/min)
Table T-Slot Size (inch / mm)
Work Table Load Capacity (kg)
Spindle Speeds Vertical (No./ rpm)
9 (220 - 2400)
Motor Power - Vertical (kW / hp)
1.5 / 2
Voltage / Amperage (V / amp)
240 / 10
Overall Height (mm)
Nett Weight (kg)
A well-built entry level turret milling / drilling machine with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 220mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The screwed belt guard covers on each side of the head offer secure safety whilst providing easy access to the belts and pulleys for speed changing.

Other features include taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.
  • Mill head tilts to ±90º left to right
  • 340mm horizontally sliding and rotating ram
  • NT30 vertical spindle is hardened and ground
  • Precision-ground dovetail slide-ways and table
  • Precision milling table incorporating machined T-slots
  • Rear concertina slide-way cover
  • Forward and reverse on/off switch
  • Fine hand wheel operated quill feed
  • Swarf & splash tray
  • Spindle lock for quill
  • Metric dial graduations @ 0.02mm for X , Y & Z-Axis
  • Vertical dial graduations on hand wheel @ 0.05mm
  • All slides utilise dovetail construction for maximum rigidity

  • * Note: X & Y travels maybe reduced due to safety stops
  • X-Axis power-feed
  • Safety cutter guard
  • Swarf tray
  • Coolant system
  • Halogen lamp
  • Drill chuck & arbor
  • 2 & 3MT adaptors
  • 8-piece metric collet chuck set (4-16mm)
Product Brochure
Instruction Manual & Parts List
1.08 MB
Spare Parts Ordering
To assist you in ordering your spare part quicker than ever before, we have listed our most common spare parts to suit our Hafco Machinery for purchase online. Just choose between the 2 options outlined below, to find exactly what you are looking for. If you need further assistance please contact us.
Option 1
Browse through the "Common Spare Parts" tab below . Once you have identified your part, you can add it to your cart by clicking on the "+ ADD TO CART" button. If you wish to add multiples of this part you can either click the "+ ADD TO CART" button as many times as you like or click on the "VIEW CART" button and change the order quantity, prior to completing your order.
Option 2
If your part is NOT listed in the "Common Spare Parts" tab below , click the "MORE INFO" button to complete the "Spare Parts Enquiry Form".
This will provide you with the option to email your spare part enquiry direct to our Spare Parts and Service Department, or if you wish, you can download a printable version of this enquiry form which will include a copy of the Parts List to suit this machine (if available). Further instructions for the return email address or fax number of this printable form is provided on the document for your convenience.
NOTE: Please remember to clearly identify your part on the included parts diagram if necessary so that we can respond as quickly as possible with a price and availability for the part(s) you require.