On Sale
Order Code: K018D
ex-gst
inc-gst
$ 3,240.00
$ 3,564.00
$ 2,770.00
$ 3,047.00
415V / (NO PLUG)
3 Years Warranty
Finance Available
Description

AC/DC RAZOR 320 TIG Welder - Inverter TIG/ARC Welder Package Deal

10-320A, #KUMJRRW320ACDC
Includes Foot Pedal Control Switch, Auto Welding Helmet & Tig Starters Kit
Overview
The RAZOR 320 AC/DC is a new generation inverter welder with a primary function of AC/DC TIG. AC TIG: Featuring multiple AC output waveforms of Square, Trapezoidal and Sine, combined with AC Balance and AC Frequency control you have the ultimate tool in AC TIG Welding mode to suit all your AC TIG welding requirements. DC TIG: Latest 43KHz inverter frequency technology provides the ultimate in smooth and stable arc condition for DC TIG welding mode, coupled with the Digital Weld Sequence Program provides complete and professional DC TIG Welding function. MIX ARC: This function of MIX AC/DC makes it possible to modulate the welding current, alternating a period of TIG AC with a period of TIG DC-. This means that the efficiency of AC TIG welding can be combined with the high penetration of DC TIG welding, obtaining higher welding speeds and establishing the weld puddle quicker on cold work-pieces. The operator adjustable parameter is the percentage of AC waveform compared to DC- waveform over the entire period, which can be varied from 5~95%. MMA: Full attention is given to MMA welding, providing both DC and AC output modes. Ignition AMP and Ignition Time provide for an operator-controlled Hot Start of the weld by applying extra current to the set weld current over a preset time. Arc force allows adjustment of the arc transfer from a digging action through to a softer layering effect.

The complete and professional MMA function allows you to set the ideal arc condition no matter what the electrode and welding situation. Weld Sequence Control: The Digital Weld Sequence Program and intelligent MCU software provide full TIG functionality in AC, DC and MIX modes. Adjustable pre-sets include Pre-Gas time, Start Current, Up Slope, Down Slope, Finish Current level and Post-Gas time. Digital Pulse parameter presets include Peak & Base current; Pulse Frequency & Pulse Width. HF and Lift Arc Ignition. Torch Mode: Multiple torch trigger selections of 2T, 2S, 4T, 4S provide complete flexibility and operator control over the weld sequence from start to finish. Remote Control: The Remote Interface allows connection of either Torch Remote or Foot Pedal for remote control of amperage output. Job Memory: Job memory function allows you to enter and store weld parameter settings under job numbers. The job number can be recalled to reveal and use the weld parameters stored, and weld parameters can be further adjusted and stored as required. A total of 50 Jobs can be memorised and stored for recall. Water Cooler Control: Activating the water cooler control allows for the water cooler to operate when welding current is available during welding and will switch off automatically after 5 minutes of no welding current. The RAZOR 320 AC/DC is a complete and professional TIG /MMA welding machine that is ideal for all high-end aluminium, stainless steel fabrication, marine and industrial engineering welding situations. Designed and built to our specification and manufactured in compliance with AS/ NZ60974-1.
Features
  • AC/DC RAZOR 320 TIG Welder - AC/DC Inverter TIG/ARC Welder - (W176)
  • AC TIG
  • DC TIG
  • MIX ARC TIG
  • STICK
  • WELD SEQUENCE CONTROL
  • 2T/2S/4T/4S Torch Mode
  • Foot Control Ready
  • Water Cooler Ready

  • AC TIG: Featuring multiple AC output waveforms of Square, Trapezoidal and Sine, combined with AC Balance and AC Frequency control you have the ultimate tool in AC TIG Welding mode to suit all your AC TIG welding requirements.

  • DC TIG: Latest 43KHz inverter frequency technology provides the ultimate in smooth and stable arc condition for DC TIG welding mode, coupled with the Digital Weld Sequence Program provides complete and professional DC TIG Welding function.

  • MIX ARC: This function of MIX AC/DC makes it possible to modulate the welding current, alternating a period of TIG AC with a period of TIG DC-. This means that the efficiency of AC TIG welding can be combined with the high penetration of DC TIG welding, obtaining higher welding speeds and establishing the weld puddle quicker on cold work-pieces. The operator adjustable parameter is the percentage of AC waveform compared to DC- waveform over the entire period, which can be varied from 5-95%.

  • MMA: Full attention is given to MMA welding, providing both DC and AC output modes. Ignition AMP and Ignition Time provide for an operator-controlled Hot Start of the weld by applying extra current to the set weld current over a preset time. Arc force allows adjustment of the arc transfer from a digging action through to a softer layering effect. The complete and professional MMA function allows you to set the ideal arc condition no matter what the electrode and welding situation.

  • Weld Sequence Control: The Digital Weld Sequence Program and intelligent MCU software provide full TIG functionality in AC, DC and MIX modes. Adjustable pre-sets include Pre-Gas time, Start Current, Up Slope, Down Slope, Finish Current level and Post-Gas time. Digital Pulse parameter presets include Peak & Base current; Pulse Frequency & Pulse Width. HF and Lift Arc Ignition.

  • Torch Mode: Multiple torch trigger selections of 2T, 2S, 4T, 4S provide complete flexibility and operator control over the weld sequence from start to finish.

  • Remote Control: The Remote Interface allows connection of either Torch Remote or Foot Pedal for remote control of amperage output. Job Memory: Job memory function allows you to enter and store weld parameter settings under job numbers. The job number can be recalled to reveal and use the weld parameters stored, and weld parameters can be further adjusted and stored as required. A total of 50 Jobs can be memorised and stored for recall.

  • Water Cooler Control: Activating the water cooler control allows for the water cooler to operate when welding current is available during welding and will switch off automatically after 5 minutes of no welding current.



  • AC Wave Forms:

  • AC Square Wave: Allows the current to change from electrode (+ positive) to electrode (- negative) very quickly. This produces high voltage as the current switches polarities allowing the arc to restart
  • easily. The arc can be maintained without the use of high-frequency and the fast transitions provide for responsive, dynamic and focused arc for better directional control.

  • AC Triangle Wave: Characterised by a particularly soft and concentrated arc combining the effect of peak amperage while reducing overall heat input. Leads to quick puddle formation and, because
  • of lowered heat input, reduced weld distortion, especially on thin material. This waveform is ideal for very precise welding of thin Aluminium plate.

  • AC Sine Wave: It is the standard waveform, characterised by low noise and excellent arc control, it also gives the soft-arc feel of a conventional power source, while using square transitions to
  • eliminate the need for continuous HF.

  • AC MIX ARC: This function of MIX AC/DC makes it possible to modulate the welding current, alternating a period of TIG AC with a period of TIG DC-. This means that the efficiency of AC TIG
  • welding can be combined with the high penetration of DC TIG welding, obtaining higher welding speeds and establishing the weld puddle quicker on cold work-pieces. The operator adjustable
  • parameter is the percentage of AC waveform compared to DC- waveform over the entire period, which can be varied from 5~95%. Ideal for welding heavier gauge material with less current than
  • AC welding.

  • Foot Control - Suits RAZOR AC/DC 320 Tig Welder - (W176A)
  • Foot Control provides variable amperage adjustment
  • 9 pin electrical connector

  • PROMAX 500 - Auto Darken Welding Helmet - 5~8 / 9~13 Shade - (W003)
  • Functions: variable shade 9-13, sensitivity & delay adjustments, plus grind-mode switch (locks the lens in light shade)
  • Super-size viewing area 98 x 87mm (85cm2) with ultra clear optics & ECR (Enhanced Colour Recognition)
  • High-Impact tested and rated to Australian standard AS1337.1
  • Auto-darkening lens complies with AS1338.1
  • 'Hinge & Lock' lens retainer system = easy cover lens replacement, seals tightly against spatter to prevent damage to electronic lens
  • Magnification lens holder - takes standard magnification lenses
  • Reliable Power Source: Replaceable battery plus solar assist, efficient electronics for low power consumption
  • 'Full Laminate' lens construction: each layer in the electronic lens assembly is firmly laminated for superior optical quality and long service life. This is in contrast to cheaper lenses which are simply glued on the edge and, over time, are prone to contamination and failure.
  • Lightweight, durable and shock resistant shell
  • Switching speed: 1/30,000 (0.00003) sec
  • Auto-on & Auto-off = No buttons to press, hassle-free operation
  • 2 year/24 month warranty - Up to 100% longer than other helmets in this class

  • TSPT3 - T3 Tig Welder Starter Pack - (W502A)
  • 1 x 1.6mm collet body - (W6002)
  • 1 x 2.4mm collet body - (W6003)
  • 1 x Ceramic cup - size 6 - (W6000)
  • 1 x Head gasket - (W6005)
  • 1 x Heat isolator - (W6006)
  • 1 x Long black cap - (W6008)
  • 1 x Short black cap - (W6007)
  • 10 x 1.6mm tungsten electrode - ceriated grey - (W597)
  • 10 x 2.4mm tungsten electrode - zirconiated white - (W596)
  • 1 x Welding gloves
  • 1 x Magnetic tig torch holder - (W10361)
  • 1 x Magnet square
  • 1 x Stainless steel wire brush
Includes
  • AC/DC RAZOR 320 TIG Welder - AC/DC Inverter TIG/ARC Welder - (W176)
  • Foot Control - Suits RAZOR AC/DC 320 Tig Welder - (W176A)
  • PROMAX 500 - Auto Darken Welding Helmet - 5~8 / 9~13 Shade - (W003)
  • TSPT3 - T3 Tig Welder Starter Pack - (W502A)
  • 4m High Performance T3 TIG Torch (including consumables)
  • 4m Twist Lock Electrode Holder
  • 500 Amp Earth Clamp & Lead
  • Argon Flowmeter Regulator
  • 2m Gas Hose Complete with fittings
  • Operating Manual
Optional Accessories
  • Water Cooling System, Trolley & Torch (W176K)
  • Water Cooling System & Trolley (W176C)
  • Water Cooled Torch (W176C-2)
  • Foot Control (W176A)
Recommended Accessories
Compare Product Range Compare Selected
  • Compare: 
  • Wishlist: 
  • ORDER CODE
  • Type
  • MODEL
  • Part Number
  • (V / amp)Voltage / Amperage
  • (amp)Recommended Plug
  • (Hz)Input Frequency (Hz)
  • (amp)Input Current
  • (amp)Ieff Current
  • (kVA)Power Rating
  • Rated Output Current

  • Range of Output Current


  • (amp)Arc Force
  • (V)No Load Voltage
  • (sec)Pre-Flow (S)
  • (%)Clean Width (%)
  • (sec)Slope-Down Time (S)
  • (sec)Post-Flow Time
  • (%)Base Current
  • (Hz)Pulse Frequency
  • (%)Pulse Duty Cycle
  • (% @ amp)Duty Cycle 40 Deg C - TIG
  • Duty Cycle 40 Deg C - MMA
  • Duty Cycle 40 Deg C - Plasma
  • (mm)Plasma Severance Cut Capacity Carbon Steel
  • (mm)Plasma Production Cut Capacity Carbon Steel
  • (mm)Plasma Production Cut Capacity Aluminium
  • Protection Class
  • (Yes / ~)Remote Control
  • (kVA)Recommended Generator
  • (%)Efficency
  • Power Factor
  • Insulation Class
  • (mm)Dimensions
  • (kg)Nett Weight
  • (ex-gst)Pricing  
  • (inc-gst)   
  • On SaleW165
  • Compare
  • Wishlist
  • W165
  • DC Inverter Welder
  • VIPER ARC 140
  • #KUMJRVA140
  • 240 / 10
  • 10
  • ~
  • 27.4 amp
  • 10 amp
  • 6.49
  • 140A / 25.6V
    20 - 140 amps
  • ~
     
     
  • ~
  • 68
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • 15%@140A
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • 6.5
  • 85
  • 0.65
  • F
  • 295 x 135 x 270
  • 4
  • $170.00
  • $187.00
  • ADD TO CART
  • On SaleW162
  • Compare
  • Wishlist
  • W162
  • DC Inverter Welder
  • ARC 140 MMA / TIG
  • #KUMJRRW140CA
  • 240 / 10
  • 10
  • ~
  • ~
  • 9.7 amp
  • ~
  • 140A / 25.6V
    10 - 140 amps
  • ~
     
     
  • ~
  • 9
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • 35%@140A
  • 15%@140A
  • ~
  • ~
  • ~
  • ~
  • IP21
  • ~
  • 7
  • ~
  • ~
  • F
  • 313 x 250 x 130
  • 4.7
  • $270.00
  • $297.00
  • ADD TO CART
  • On SaleW1645
  • Compare
  • Wishlist
  • W1645
  • DC Inverter Welder
  • RAZORARC 180DC
  • #KUMJRRW180
  • 240 / 15
  • 15
  • ~
  • ~
  • 15.3 amp
  • ~
  • 180A / 27.2V
    10 - 180 amps
  • ~
     
     
  • ~
  • 9
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • 50%@180A
  • 20%@180A
  • ~
  • ~
  • ~
  • ~
  • IP21
  • ~
  • ~
  • ~
  • 0.7
  • F
  • 320 x 120 x 310
  • 10
  • $280.00
  • $308.00
  • ADD TO CART
  • On SaleK017
  • Compare
  • Wishlist
  • K017
  • DC Inverter Welder PKG
  • ARC 180DC Package
  • #KUMJRRW180
  • 240 / 15
  • 15
  • ~
  • ~
  • 15.3 amp
  • ~
  • 180A / 27.2V
    10 - 180 amps
  • ~
     
     
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • 50%@180A
  • 20%@180A
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • 9.0
  • ~
  • ~
  • ~
  • 320 x 120 x 310
  • 10
  • $440.00
  • $484.00
  • ADD TO CART
  • On SaleW167
  • Compare
  • Wishlist
  • W167
  • DC Inverter Welder
  • Razorweld 200
  • #KUMJRRW200CA
  • 240 / 15
  • 15
  • ~
  • ~
  • 12 amp
  • ~
  • 200A/28V MMA
    200A/18V TIG
  • 10 - 200 amp
     
     
  • ~
  • 9
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • 25%@200A TIG
  • 25%@200A MMA
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • 7
  • ~
  • 0.99
  • F
  • 365 x 227 x 135
  • 6.5
  • $520.00
  • $572.00
  • ADD TO CART
  • On SaleW1635
  • Compare
  • Wishlist
  • W1635
  • DC Inverter Welder
  • Razorweld 200P / HF
  • #KUMJRR200DC
  • 240 / 15
  • 15
  • ~
  • 20 amp
  • 14.6 amp
  • 7
  • 200 amps
     
  • 10-160 amp / 26.4V MMA
    5-200 amp / 18V TIG
     
  • ~
  • 43
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • 25%@200A
  • 20%@180A
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • 9
  • 85
  • 0.7
  • F
  • 365 x 135 x 277
  • 6.5
  • $850.00
  • $935.00
  • ADD TO CART
  • On SaleW169
  • Compare
  • Wishlist
  • W169
  • AC/DC Inverter Welder
  • VIPER TIG 180 AC/DC
  • #KUM-M-VTIG180ACDC
  • 240 / 10
  • 10
  • ~
  • 24
  • 8
  • ~
  • 180 amp
    130 amps MMA
  • ~
     
     
  • 0 - 40 amps
  • 70
  • 0.1 - 3
  • ~
  • 0 - 15
  • 0.5 - 15
  • ~
  • 0.2 - 200
  • 10 - 90
  • 10 @180
  • 10 @ 130
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • 9
  • ~
  • ~
  • F
  • 502 x 218 x 382
  • 12.8
  • $1,040.00
  • $1,144.00
  • ADD TO CART
  • On SaleK018A
  • Compare
  • Wishlist
  • K018A
  • AC/DC Inverter Welder Package Deal
  • VIPER TIG 180 AC/DC
  • #KUM-M-VTIG180ACDC
  • 240 / 10
  • 10
  • ~
  • 24
  • 8
  • ~
  • 180 amp
    130 amps MMA
  • ~
     
     
  • 0 - 40 amps
  • 70
  • 0.1 - 3
  • ~
  • 0 - 15
  • 0.5 - 15
  • ~
  • 0.2 - 200
  • 10 - 90
  • 10 @180
  • 10 @ 130
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • 9
  • ~
  • ~
  • F
  • 502 x 218 x 382
  • 12.8
  • $1,126.36
  • $1,239.00
  • ADD TO CART
  • On SaleW1721
  • Compare
  • Wishlist
  • W1721
  • AC/DC Inverter Welder
  • RAZOR Digital 200 AC/DC
  • #KUM-M-RTIG200ACDC
  • 240 / 15
  • 15
  • 50
  • ~
  • 15 amp
  • 6.0
  • 200 amp TIG
    160 amp MMA
  • 10 - 200 amp TIG
    10 - 160 amp MMA
     
  • 0 - 40 amps
  • 68
  • 0 - 3
  • ~
  • 0 - 15
  • 0.5 - 15
  • 5 - 200A
  • 0.2 - 200
  • 10 - 90
  • 25%@200A
  • 30%@160A
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • 9
  • 85
  • 0.70
  • B
  • 426 x 162 x 326
  • 10
  • $1,180.00
  • $1,298.00
  • ADD TO CART
  • On SaleW176
  • Compare
  • Wishlist
  • W176
  • AC/DC Inverter Welder
  • RAZOR DIGITAL 320
  • #KUMJRRW320ACDC
  • 415 / 10
  • 10
  • 50-100
  • 19 amp
  • 15 amps
  • 9
  • 320 amp
     
  • 10 - 320 amp
     
     
  • ~
  • 73
  • 0.5-10
  • ~
  • 0 - 15
  • 0.5-15
  • ~
  • 0.5 - 200
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • ~
  • ~
  • ~
  • ~
  • 566 x 223 x 405
  • 25.5
  • $2,300.00
  • $2,530.00
  • ADD TO CART
  • On SaleK018C
  • Compare
  • Wishlist
  • K018C
  • AC/DC Inverter Welder Package Deal
  • RAZOR Digital 200 AC/DC
  • #KUM-M-RTIG200ACDC
  • 240 / 15
  • 15
  • 50
  • ~
  • 15 amp
  • 6.0
  • 200 amp TIG
    160 amp MMA
  • 10 - 200 amp TIG
    10 - 160 amp MMA
     
  • 0 - 40 amps
  • 68
  • 0 - 3
  • ~
  • 0 - 15
  • 0.5 - 15
  • 5 - 200A
  • 0.2 - 200
  • 10 - 90
  • 25%@200A
  • 30%@160A
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • 9
  • 85
  • 0.70
  • B
  • 426 x 162 x 326
  • 10
  • $1,544.55
  • $1,699.00
  • ADD TO CART
  • On SaleK018D
  • Compare
  • Wishlist
  • K018D
  • AC/DC Inverter Welder Package Deal
  • RAZOR DIGITAL 320
  • #KUMJRRW320ACDC
  • 415 / 10
  • 10
  • 50-100
  • 19 amp
  • 15 amps
  • 9
  • 320 amp
     
  • 10 - 320 amp
     
     
  • ~
  • 73
  • 0.5-10
  • ~
  • 0 - 15
  • 0.5-15
  • ~
  • 0.5 - 200
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • ~
  • IP21S
  • ~
  • ~
  • ~
  • ~
  • ~
  • 566 x 223 x 405
  • 25.5
  • $2,770.00
  • $3,047.00
  • ADD TO CART