Description
PH-28HD - Power Hammer
2mm Mild Steel Capacity
711mm Throat Depth
Overview
The PH-28HD power hammer can hit harder and move metal faster than most hammers its size. This USA-made machine lets you shape multiple sheets at once, then planish them out.
Recommended for: Automotive shops that need to shape metal quickly and often work on fenders.
Features
- 711mm throat with deep cutout designed for fenders
- Large 2mm (14 gauge) mild steel capacity
- Variable speed from 0 to 1,000 beats per minute
- 3hp motor runs on 240-volt single-phase power
- Developed over 20 years of research to find what’s most important to metal shapers
- Hits up to 75% harder than its predecessor, the MH-19
- Incorporates Dupont linkage (also used on our massive MH-37HD) to shape heavier gauges of steel
- Quick-release design lets you get the tooling out of the way to add or remove your panel
- Switch between 3 fixed stroke settings on the fly: 1/4" (6.35mm) / 1/2" (12.7mm) / 3/4" (19.05mm)
- Adjust the lower ram up or down via a large acme thread, so you won’t need to shim if different tool thicknesses are required
- Simple, proven mechanism uses easily replaceable, off-the-shelf die springs
- Floating chain and sprocket setup eliminates the leather strap commonly found on legacy hammers
- You can add an optional planishing hammer attachment to the side of this power hammer
- Rigid 25.4mm plate steel frame ensures high-quality, controllable shaping force and won’t buckle under the heavy hits
- Portable pedestal raises the working height and allows better visibility of the hit mark
Optional Accessories
- You can bolt a planishing hammer attachment to the side of the machine for when you need to finish a piece