MetalMaster Cold Saw
  • 1 of 17
  • 2 of 17
    Rear View
  • 3 of 17
    Swivel Head to 45 degrees in Both Directions
  • 4 of 17
    Left View
  • 5 of 17
    Side View
  • 6 of 17
    Left Side View
  • 7 of 17
    Dual Vice Clamping
  • 8 of 17
    Auto Retract Safety Blade Guard
  • 9 of 17
    Quick Action Vice
  • 10 of 17
    Swivel Head Scale
  • 11 of 17
    Swivel Head Locking Lever
  • 12 of 17
    Blade Coolant System
  • 13 of 17
    Power & Emergency Stop Switch
  • 14 of 17
    Dead Man Trigger Switch
  • 15 of 17
    Coolant Tray Resevoir
  • 16 of 17
    Spring Assisted Head Return
  • 17 of 17
    Show on Optional Stand S820
Order Code: S816
CS-275 - MetalMaster Cold Saw (240V)
90 x 50mm Rectangle Capacity
Single Speed 42rpm
Cutting Head Action (auto-manual)
Operation Type
Swivel - Dual Mitre
Round Capacity @ 90º / 45º
75mm / 65mm
Square Capacity @ 90º / 45º
60mm / 50mm
Rectangle Capacity @ 90º / 45º (WxH)
90 x 50mm / 70 x 50mm
Blade Size (Ø X Bore)
275 x 32mm
Vice Clamping Fixture
Coolant System
Table Working Height (with Stand)
Blade Speeds
Motor Power
0.97kW / 1.3hp
Weight (nett)
Manufactured in Taiwan

The Hafco MetalMaster manual cold saw consists of a 275mm circular saw blade that runs at a relatively slow speed in conjunction with a coolant system. These cold saws are designed to cut at 90º, or mitre up to 45º in either left or right side of the material simply by releasing the lever located at front of machine. Each machine comes standard with a very heavy and strong cast iron frame base with a cast dual pivot saw head supported by an industrial swivel base system, which makes a MetalMaster cold saw one of the most rugged machines on the market.

The MetalMaster manual cold saw head is well balanced and uses a long actuating handle giving the operator greater leverage and control to guide the saw blade through the work piece of tubing or pipe etc, with ease and utilises a quality head retraction system for returning the cold saw head to the start position. The vice clamps the work piece on both sides of a cut, which extends blade life because the cut off does not drop into the blade.
  • Rugged cast iron construction offers years of accurate cutting
  • Lock at any angle between -45° or +45° mitre in both directions via locking lever
  • Degree markings engraved onto swivelling base for quick and accurate mitre cutting
  • Dual material clamp system providing burr free cuts on both pieces of material
  • Quick action vice clamp lever designed to increase production
  • Built in blade coolant pump system with flow control valve
  • Oil sight glass located on right side of the gearbox so operator can maintain correct lubrication levels according to specifications provided
  • Dead man trigger switch located on cutting handle provides operator safety on/off power control
  • Automatic retract safety blade guard covers blade when returned to home position
  • Spring assisted head return provides a even balance during cutting operation and reduces operator fatigue
  • HSS cutting blade is included for general types of material and thickness
  • Blade
  • Coolant system
Product Brochure
Blade Selection Chart
374.13 KB
Instruction Manual
1.68 MB
Enter your postcode to estimate the delivery fee for this product.
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • CS-275 (S816)
Cutting Head Action (auto-manual)
Operation Type
Round Capacity @ 90º / 45º
Square Capacity @ 90º / 45º
Rectangle Capacity @ 90º / 45º (WxH)
Blade Size (Ø X Bore)
Vice Clamping Fixture
Coolant System
Table Working Height (with Stand)
Blade Speeds
Motor Power
Weight (nett)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.
Parts List
503.15 KB