Pneumatic Planishing Hammer
  • 1 of 10
  • 2 of 10
    Left View
  • 3 of 10
    Planishing Work Area
  • 4 of 10
    Pneumatic Hammer
  • 5 of 10
    Adjustable Dial 875 to 1350 Blows Per Minute
  • 6 of 10
    Release Pin for Replacing Formers and Quick Release Handle
  • 7 of 10
    3 x Formers
  • 8 of 10
    Plug To Fill Frame With Sand
  • 9 of 10
    Foot Control
  • 10 of 10
    Air In Adaptor
Order Code: S227A
PPH-51 - Pneumatic Planishing Hammer
1.2mm Mild Steel Capacity
500mm throat
Throat Capacity
Capacity - Mild Steel
Blows per Minute
875 - 1350
Radius Anvils
25, 50, 76mm
Air Consumption
Working Height
The PPH-51 Planishing Hammer has been long used in metal fabrication and restoration to smooth large areas of metal after it has been roughly shaped with a hammer and sand bag. Common uses are for custom motorcycle gas tank and fender manufacturing, street rod bodies, patch panels for auto restoration, repair and metal sculpting.

The power head is a heavy-duty aircraft rivet gun, sturdy steel fabricated frame with 500mm throat depth, is beefy enough to smooth 1.2mm mild steel. A quick release allows the lower shaft to slide down, to accept panels with deep flanges. The power head adjustment controls the intensity from 875-1350 blows per minute. A foot control starts and stops the hammering while being hooked up to compressed air.
Includes Ø32mm flat top die, 25, 50 and 76mm radius anvils.
The machine weigh's 25kg and has bolt holes to be easily secured to floor.
  • 500mm throat capacity
  • 1.2mm mild steel capacity
  • Foot pedal operation
  • Comes with 25, 50, 76mm radius anvils
  • 875-1350 blows/minute
  • 50 - 100PSI pressure
  • 4cfm air consumption
  • Overall height 1220mm
  • The footprint of the machine is 750mm x 350mm
Product Brochure
Enter your postcode to estimate the delivery fee for this product.
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.