HAFCO METALMASTERHM-51
Turret Milling Machine
  • 1 of 29
    M576
  • 2 of 29
    Left View
  • 3 of 29
    3 Axis Digital Readout with Holder
  • 4 of 29
    3 Axis Digital Readout
  • 5 of 29
    Head Controls
  • 6 of 29
    Head with Drawbar
  • 7 of 29
    Rotating Head
  • 8 of 29
    Adjustable Swivel and Sliding Ram
  • 9 of 29
    Control Panel
  • 10 of 29
    Spindle Speed Chart
  • 11 of 29
    Safety Cutter Guard
  • 12 of 29
    30NT Spindle with Lock Handle
  • 13 of 29
    Table with Coolant Drain Hose
  • 14 of 29
    Side View
  • 15 of 29
    Concertina Slideway Cover
  • 16 of 29
    Quill Hand Wheels
  • 17 of 29
    Quill Hand Wheels Dials
  • 18 of 29
    Swivel Machine Vice
  • 19 of 29
    Table
  • 20 of 29
    Table Feed Limit Switch
  • 21 of 29
    Work Light and Coolant Hose
  • 22 of 29
    Coolant Pump
  • 23 of 29
    X Axis Power Feed with Rapid
  • 24 of 29
    X Axis Dial - Power Feed Side
  • 25 of 29
    X Axis Dial
  • 26 of 29
    Y Axis Dial
  • 27 of 29
    Z Axis Handle
  • 28 of 29
    Z Axis Dial
  • 29 of 29
    Included Accessories
Order Code: M576
HM-51 - Turret Milling Machine (240V)
(X) 600mm (Y) 220mm (Z) 310mm
Includes Digital Readout, Vice & Collet Chuck System
HAFCO METALMASTER
ORDER CODE
M576
MODEL
HM-51
Digital Readout
3-Axis Digital Readout
Type
Vertical
Table Size (mm)
1000 x 240
Spindle Taper - Vertical
NT30
Longitudinal Travel (X-Axis) (mm)
600*
Cross Travel (Y-Axis) (mm)
220*
Vertical Travel (Z-Axis) (mm)
310
Type of Slides
Dovetail
Ram Travel (mm)
350
Spindle to Table (mm)
415
Quill Travel / Diameter (mm)
120 / 90
Throat Depth (max.) (mm)
550
Tilting Head (Left ~ Right)
±90º
Tilting Head (Forward ~ Back)
Fixed
Drilling Capacity (mm)
30
End Milling Capacity (mm)
25
Face Milling Capacity (mm)
80
Power Feed - Quill (mm/rev)
Manual
Power Feed - Longitudinal (X-Axis) (mm/min)
20 - 2000
Power Feed - Cross (Y-Axis) (mm/min)
Optional *
Power Feed - Vertical (Z-Axis) (mm/min)
Optional *
Table T-Slot Size (inch / mm)
14
Work Table Load Capacity (kg)
175
Spindle Speeds Vertical (No./ rpm)
9 (220 - 2400)
Motor Power - Vertical (kW / hp)
1.5 / 2
Voltage / Amperage (V / amp)
240 / 10
Overall Height (mm)
2050
Nett Weight (kg)
850
Description
A well-built entry level turret milling / drilling machine with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 220mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The screwed belt guard covers on each side of the head offer secure safety whilst providing easy access to the belts and pulleys for speed changing.

Other features include 3 axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 160mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.
Features
  • 3 Axis digital readout system
  • Mill head tilts to ±90º left to right
  • 300mm horizontally sliding and rotating ram
  • NT30 vertical spindle is hardened and ground
  • Precision-ground dovetail slide-ways and table
  • Precision milling table incorporating machined T-slots
  • Rear concertina slide-way cover
  • Forward and reverse on/off switch
  • Fine hand wheel operated quill feed
  • Swarf & splash tray
  • Spindle lock for quill
  • Metric dial graduations @ 0.02mm for X , Y & Z-Axis
  • Vertical quill hand-wheel dial graduations @ 0.05mm
  • All slides utilise dovetail construction for maximum rigidity

  • * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
  • * Note: Optional Y & Z power feeds require additional parts & fitting (not included)
Includes
  • 3 Axis digital readout system
  • X-Axis power feed
  • Safety cutter guard
  • Swarf tray
  • Coolant system
  • Halogen lamp
  • 160mm machine vice
  • Drill chuck & arbor
  • 2 & 3MT adaptors
  • Boring bar arbor
  • 8-piece metric collet chuck set (4-16mm)
Product Brochure
 
Instruction Manual
10.1 MB
Select your Postcode & Suburb to estimate the delivery fee for this product.
Postcode & Suburb:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • HM-51 (M576)
ORDER CODE
MODEL
Digital Readout
Type
Table Size (mm)
Column Type
Spindle Taper - Vertical
Spindle Taper - Horizontal
Longitudinal Travel (X-Axis) (mm)
Cross Travel (Y-Axis) (mm)
Vertical Travel (Z-Axis) (mm)
Type of Slides
Ram Travel (mm)
Spindle to Table (mm)
Quill Travel / Diameter (mm)
Throat Depth (max.) (mm)
Tilting Head (Left ~ Right)
Tilting Head (Forward ~ Back)
Drilling Capacity (mm)
End Milling Capacity (mm)
Face Milling Capacity (mm)
Power Feed - Quill (mm/rev)
Power Feed - Longitudinal (X-Axis) (mm/min)
Power Feed - Cross (Y-Axis) (mm/min)
Power Feed - Vertical (Z-Axis) (mm/min)
Table T-Slot Size (inch / mm)
Work Table Load Capacity (kg)
Spindle Speeds Vertical (No./ rpm)
Spindle Speeds Horizontal (No./ rpm)
Motor Power - Vertical (kW / hp)
Motor Power - Horizontal (kW / hp)
Voltage / Amperage (V / amp)
Overall Height (mm)
Nett Weight (kg)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.