HAFCO METALMASTERHM-52G
Turret Milling Machine Geared Head Horizontal - Vertical
  • 1 of 19
    HM-52G
  • 2 of 19
    3 Axis Digital Readout
  • 3 of 19
    Geared Head Spindle Speed Selectors
  • 4 of 19
    Horizontal Spindle
  • 5 of 19
    X Axis Power Feed with Rapid
  • 6 of 19
    Spindle Speed Chart
  • 7 of 19
    Tilting Head Scale
  • 8 of 19
    Adjustable Swivel & Sliding Ram
  • 9 of 19
    Concertina Slide Way Cover
  • 10 of 19
    Swivel Table & Feed Limit Switches
  • 11 of 19
    Horizontal Speed Spindle Chart
  • 12 of 19
    Vertical Spindle Switch
  • 13 of 19
    Knee Feed Handle
  • 14 of 19
    Horizontal Spindle Support
  • 15 of 19
    Halogen Light
  • 16 of 19
    Horizontal Spindle Switch
  • 17 of 19
    Coolant Pump
  • 18 of 19
    Accessories Included, Swivelling Vice, Metric Collet Chuck, Drill Chuck & Arbor, Morse Taper Adaptors, 2 x Horizontal Arbors
  • 19 of 19
    Safety Chuck Guard
HM-52G
Turret Milling Machine Geared Head Horizontal - Vertical (415V)
(X) 600mm (Y) 200mm (Z) 340mm
Includes Digital Readout
HAFCO METALMASTER
ex GST
inc GST
$5,190.00
$5,709.00

CODE
M163D
Model
HM-52G
Digital Readout
3-Axis Digital Readout
Type
Vertical & Horizontal
Table Size
1000 x 240mm
Spindle Taper - Vertical
NT30
Spindle Taper - Horizontal
NT30
Longitudinal Travel (X-Axis)
600mm *
Cross Travel (Y-Axis)
200mm *
Vertical Travel (Z-Axis)
340mm
Type of Slides
Dovetail
Ram Travel
500mm
Spindle to Table
375mm
Quill Travel / Diameter
125mm / 90mm
Throat Depth (max.)
640mm
Swivel Head (Left ~ Right)
±90º
Tilting Head (Front ~ Back)
Fixed
Power Feed - Quill
Manual
Power Feed - Longitudinal (X-Axis)
20 - 2000 mm/min
Power Feed - Cross (Y-Axis)
Optional
Power Feed - Vertical (Z-Axis)
Optional
Table T-Slot Size
14mm
Work Table Load Capacity
175kg
Spindle Speeds Vertical (steps/rpm)
8 (115-1750rpm)
Spindle Speeds Horizontal (steps/rpm)
9 (60-1350rpm)
Motor Power - Vertical
1.5kW / 2hp
Motor Power - Horizontal
1.5kW / 2hp
Motor Voltage
415V
Overall Height
2060mm
Weight (nett)
1050kg
Description
A well-built entry level geared head, turret milling, vertical and horizontal, drilling machine with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 220mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. Two levers mounted on right side of milling head enables quick change off the geared spindle speeds.

Other features include 3 axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 8 piece metric collect chuck set, coolant system, X axis power feed unit, drill chuck, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Extra Features:
Swivel table
2 Arbors for the horizontal spindle
Features
  • 3 Axis digital readout system
  • Swivel table & two arbors for the horizontal spindle
  • Tilting head ±90º left to right
  • 340mm horizontally sliding and rotating ram
  • NT30 Horizontal and vertical spindles that are hardened and ground
  • Precision-ground dovetail slide-ways and table
  • Precision milling table incorporating machined T slots
  • Rear concertina slide-way cover
  • Forward and reverse on/off switch
  • Fine hand wheel operated quill feed
  • Swarf & splash tray
  • Spindle lock for quill
  • Metric dial graduations @ 0.02mm for X , Y & Z-Axis
  • Vertical dial graduations on hand wheel @ 0.05mm
  • All slides utilise dovetail construction for maximum rigidity

  • * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
Includes
  • 3 Axis digital readout system
  • X-Axis power-feed
  • Safety cutter guard
  • Swarf tray
  • Coolant system
  • Halogen lamp
  • Drill chuck & arbor
  • 2 & 3MT adaptors
  • 8-piece metric collet chuck set (4-16mm)
Product Brochure
 
Manual
1.08 MB
Tell a friend about HM-52G Turret Milling Machine Geared Head Horizontal - Vertical
Friend's Name:
Friend's Email:
Your Name:
Your Email:
Add a note (optional):

  • HM-52G (M163D)
CODE
Model
Digital Readout
Type
Table Size
Spindle Taper - Vertical
Spindle Taper - Horizontal
Longitudinal Travel (X-Axis)
Cross Travel (Y-Axis)
Vertical Travel (Z-Axis)
Type of Slides
Ram Travel
Spindle to Table
Quill Travel / Diameter
Throat Depth (max.)
Swivel Head (Left ~ Right)
Tilting Head (Front ~ Back)
Power Feed - Quill
Power Feed - Longitudinal (X-Axis)
Power Feed - Cross (Y-Axis)
Power Feed - Vertical (Z-Axis)
Table T-Slot Size
Work Table Load Capacity
Spindle Speeds Vertical (steps/rpm)
Spindle Speeds Horizontal (steps/rpm)
Motor Power - Vertical
Motor Power - Horizontal
Motor Voltage
Overall Height
Weight (nett)
Price (ex GST)
Price (inc GST)