HAFCO METALMASTERHM-47
Mill Drill - Geared & Tilting Head with DRO
  • 1 of 37
    M125D
  • 2 of 37
    Left View
  • 3 of 37
    Front View
  • 4 of 37
    Rear View
  • 5 of 37
    Left View Close Up
  • 6 of 37
    Right Side Close Up
  • 7 of 37
    Front View Close Up
  • 8 of 37
    Right Side View Close Up
  • 9 of 37
    Left Side View Close Up
  • 10 of 37
    Swivel Head 45 Degrees
  • 11 of 37
    Swivel Head 45 Degrees Front View
  • 12 of 37
    2 Axis Digital Read Out
  • 13 of 37
    Control Panel
  • 14 of 37
    Swivel Head Scale
  • 15 of 37
    Swivel Head Digital Angle Scale
  • 16 of 37
    Quick Depth Stop Gauge
  • 17 of 37
    Digital Readout On Quill Depth
  • 18 of 37
    Spindle Speeds Chart
  • 19 of 37
    Quill Handle
  • 20 of 37
    Manual Vertical Height Adjustement Handle
  • 21 of 37
    Flexible Coolant Hose
  • 22 of 37
    Fine Feed Handle
  • 23 of 37
    Table Stops
  • 24 of 37
    Table Feed Hand Wheel
  • 25 of 37
    Work Table
  • 26 of 37
    DRO Scales
  • 27 of 37
    Vertical Axis Locks
  • 28 of 37
    Vertical Axis Dovetail Slide
  • 29 of 37
    Slide Covers
  • 30 of 37
    Drawbar
  • 31 of 37
    Drawbar Cover
  • 32 of 37
    Includes Milling Cutter
  • 33 of 37
    Work Light
  • 34 of 37
    Safety Cutter Guard
  • 35 of 37
    Coolant System
  • 36 of 37
    Coolant Return Drain Hose
  • 37 of 37
    Includes Drill Chuck & Arbor, Milling Cutter, Digital Angle Gauge & Tools
Order Code: M125D
HM-47 - Mill Drill - Geared & Tilting Head with DRO (240V)
(X) 540mm (Y) 185mm (Z) 410mm
Includes Digital Readout & Dovetail Column
HAFCO METALMASTER
ORDER CODE
M125D
Model
HM-47
Digital Readout
2-Axis Digital Readout
Type
Vertical
Table Size
820 x 240mm
Column Type
Dovetail
Spindle Taper - Vertical
3MT
Longitudinal Travel (X-Axis)
540mm *
Cross Travel (Y-Axis)
185mm *
Vertical Travel (Z-Axis)
410mm
Type of Slides
Dovetail
Spindle to Table
490mm
Quill Travel / Diameter
120mm / 75mm
Throat Depth (max.)
273mm
Tilting Head (Left ~ Right)
±90º
Tilting Head (Forward ~ Back)
Fixed
Drilling Capacity
31.5mm
End Milling Capacity
28mm
Face Milling Capacity
80mm
Table T-Slot Size
14mm
Work Table Load Capacity
55kg
Spindle Speeds Vertical (steps/rpm)
6 (95-1600rpm)
Motor Power - Vertical
1.5kW / 2hp
Motor Voltage
240V
Overall Height
2050mm
Weight (nett)
430kg
Features
  • 2 Axis digital readout system
  • Gear driven head with 6 speeds
  • Dovetail vertical Z-Axis
  • Mill head tilts to ±90º from vertical with digital display
  • Large 820 x 240mm ground work table with T-slots
  • Adjustable leadscrew nuts eliminating backlash on both axis
  • Fine feed hand wheel operating quill feed
  • Digital depth display with zero reset for quill (Includes LR44 battery)
  • Digital tilting head gauge
  • Forward and reverse on/off switch
  • 3MT spindle with 75mm diameter lockable quill
  • Adjustable table and drill length stops
  • Metric dial graduations @ 0.05mm for X & Y-Axis
  • Rear slide-way cover and slide clamps on all axis
  • Table lock on both axis
  • Fixed control panel
  • Heavy duty fabricated stand with coolant tray
  • Includes coolant system, swarf tray, drill chuck & arbor, face mill cutter & arbor & work light

  • * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
Includes
  • 2 Axis digital readout system
  • Heavy duty fabricated stand
  • Coolant system
  • Halogen light
  • Digital depth display
  • Digital tilting head gauge
  • Drill chuck & arbor
  • Face cutter & arbor
  • Safety cutter guard
Product Brochure
 
Enter your postcode to estimate the delivery fee for this product.
Postcode:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • HM-47 (M125D)
ORDER CODE
Model
Digital Readout
Type
Table Size
Column Type
Spindle Taper - Vertical
Spindle Taper - Horizontal
Longitudinal Travel (X-Axis)
Cross Travel (Y-Axis)
Vertical Travel (Z-Axis)
Type of Slides
Ram Travel
Spindle to Table
Quill Travel / Diameter
Throat Depth (max.)
Tilting Head (Left ~ Right)
Tilting Head (Forward ~ Back)
Drilling Capacity
End Milling Capacity
Face Milling Capacity
Power Feed - Quill
Power Feed - Longitudinal (X-Axis)
Power Feed - Cross (Y-Axis)
Power Feed - Vertical (Z-Axis)
Table T-Slot Size
Work Table Load Capacity
Spindle Speeds Vertical (steps/rpm)
Spindle Speeds Horizontal (steps/rpm)
Motor Power - Vertical
Motor Power - Horizontal
Motor Voltage
Overall Height
Weight (nett)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.