HAFCO METALMASTERHM-46
Mill Drill - Geared & Tilting Head
  • 1 of 22
    M124
  • 2 of 22
    Forward & Reverse On Off Switch
  • 3 of 22
    Fine Feed Handwheel Operating Quill Feed
  • 4 of 22
    Quill Depth Scale
  • 5 of 22
    Spindle Speed Selectors
  • 6 of 22
    Speed Chart
  • 7 of 22
    Spindle lock for quill
  • 8 of 22
    Face Mill Cutter
  • 9 of 22
    Rack & Pinion Wind Up Head
  • 10 of 22
    Large 730mm x 210mm ground work table with T Slots
  • 11 of 22
    Head Controls
  • 12 of 22
    Dovetailed Vertical Z Axis
  • 13 of 22
    Tilting head
  • 14 of 22
    Digital Tilting Head Gauge
  • 15 of 22
    Drawbar
  • 16 of 22
    Table Cross Feed Handle
  • 17 of 22
    Table Longitudinal Handle
  • 18 of 22
    Includes These Accessories
  • 19 of 22
    Tilt Head Front View
  • 20 of 22
    Head Shown in Vertical Position
  • 21 of 22
    Left View
  • 22 of 22
    Shown mounted to Optional Stand
Order Code: M124
HM-46 - Mill Drill - Geared & Tilting Head (415V)
(X) 475mm (Y) 195mm (Z) 450mm
Dovetail Column
HAFCO METALMASTER
On Special - Ends 30th June 2017
ex GST
inc GST
$2,190.00
$2,409.00
$1,990.00
$2,189.00

ORDER CODE
M124
MODEL
HM-46
Digital Readout
Optional
Type
Vertical
Table Size (mm)
730 x 210
Column Type
Dovetail
Spindle Taper - Vertical
3MT
Longitudinal Travel (X-Axis) (mm)
475
Cross Travel (Y-Axis) (mm)
195
Vertical Travel (Z-Axis) (mm)
450
Type of Slides
Dovetail
Spindle to Table (mm)
510
Quill Travel / Diameter (mm)
120 / 75
Throat Depth (max.) (mm)
265
Tilting Head (Left ~ Right)
±90º
Tilting Head (Forward ~ Back)
Fixed
Drilling Capacity (mm)
31.5
End Milling Capacity (mm)
28
Face Milling Capacity (mm)
80
Power Feed - Longitudinal (X-Axis) (mm/min)
Optional
Table T-Slot Size (inch / mm)
14
Work Table Load Capacity (kg)
55
Spindle Speeds Vertical (No./ rpm)
6 (95 - 1600)
Motor Power - Vertical (kW / hp)
1.1 / 1.5
Voltage / Amperage (V / amp)
415
Overall Height (mm)
1420
Nett Weight (kg)
318
Description
The HM-46 milling machines is similar in overall size to the popular RF-31 or HM-32 but with the additional benefit of a 6-speed 95-1600rpm, gear driven head which can be tilted up to 90º either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out.

The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling.

The motor is controlled by a standard forward and reverse on/off switch.

There is a heavy duty steel stand available as an extra, strongly recommended bearing in mind the weight of the machine.

Also available is a optional power feed attachment which fits to the left hand end of the table and provides a smooth, variable speed longitudinal drive.
Features
  • Gear driven head 6 speeds
  • Dovetail vertical Z-axis
  • Mill head tilts to ±90º from vertical with digital display
  • Large 730 x 210mm ground work table with T-slots
  • Adjustable leadscrew nuts eliminating backlash on both axis
  • Fine feed hand wheel operating quill feed
  • Forward and reverse on/off switch
  • Digital tilting head gauge
  • 3MT spindle with 75mm diameter quill
  • Adjustable table and drill length stops
  • Rack and pinion wind-up head
  • Rear slide-way cover and slide clamps on all axis
  • Spindle lock for quill
  • Table lock on both axis
  • Metric dial graduations @ 0.05mm for X & Y axis
Includes
  • Drill chuck
  • 3MT arbor
  • 3MT-2MT drill sleeve
  • Face cutter & arbor
  • Safety cutter guard
  • Digital tilting head gauge
Product Brochure
 
Instruction Manual
11.2 MB
Enter your postcode to estimate the delivery fee for this product.
Postcode:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • HM-46 (M124)
ORDER CODE
MODEL
Digital Readout
Type
Table Size (mm)
Column Type
Spindle Taper - Vertical
Spindle Taper - Horizontal
Longitudinal Travel (X-Axis) (mm)
Cross Travel (Y-Axis) (mm)
Vertical Travel (Z-Axis) (mm)
Type of Slides
Ram Travel (mm)
Spindle to Table (mm)
Quill Travel / Diameter (mm)
Throat Depth (max.) (mm)
Tilting Head (Left ~ Right)
Tilting Head (Forward ~ Back)
Drilling Capacity (mm)
End Milling Capacity (mm)
Face Milling Capacity (mm)
Power Feed - Quill (mm/rev)
Power Feed - Longitudinal (X-Axis) (mm/min)
Power Feed - Cross (Y-Axis) (mm/min)
Power Feed - Vertical (Z-Axis) (mm/min)
Table T-Slot Size (inch / mm)
Work Table Load Capacity (kg)
Spindle Speeds Vertical (No./ rpm)
Spindle Speeds Horizontal (No./ rpm)
Motor Power - Vertical (kW / hp)
Motor Power - Horizontal (kW / hp)
Voltage / Amperage (V / amp)
Overall Height (mm)
Nett Weight (kg)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.
Parts List
2.92 MB