Centre Lathe
  • 1 of 34
  • 2 of 34
    Front View
  • 3 of 34
    Left View
  • 4 of 34
  • 5 of 34
    Spindle Speed Levers
  • 6 of 34
    Control Panel Switches
  • 7 of 34
    Feed and Thread Gearbox
  • 8 of 34
    Spindle Speed Chart
  • 9 of 34
    Metric Feed Chart
  • 10 of 34
    Imperial Feed Chart
  • 11 of 34
    Metric and Imperial Thread Charts
  • 12 of 34
    Indicator Table
  • 13 of 34
    Chuck Guard
  • 14 of 34
    3 Point Steady
  • 15 of 34
  • 16 of 34
    Saddle Left View
  • 17 of 34
    Feed Engagement Lever
  • 18 of 34
  • 19 of 34
    2 Point Steady
  • 20 of 34
    Halogen Light and Coolant System
  • 21 of 34
    Thread Chasing Dial
  • 22 of 34
    Compound Slide Hand Wheel
  • 23 of 34
    Cross Feed Handle
  • 24 of 34
    Saddle Hand Wheel
  • 25 of 34
    Compound Slide
  • 26 of 34
    Forward Reverse Spindle Lever
  • 27 of 34
  • 28 of 34
    Tailstock Quill
  • 29 of 34
    Tailstock Handle
  • 30 of 34
    Induction Hardened Bedways
  • 31 of 34
    Safety Footbrake
  • 32 of 34
    Slide Out Swarf Tray
  • 33 of 34
    Side Access Door to Change Gears
  • 34 of 34
    Safety Micro Switch on Side Access Door
Order Code: L681
AL-335F - Centre Lathe (240V)
300 x 910mm Turning Capacity
Includes Foot Brake, Coolant Pump System & Cabinet Stand
Only Available From:
Additional Freight Charges May Apply
On Special - While Stocks Last
ex GST
inc GST

Swing Over Bed
Distance Between Centres
Spindle Bore
Swing In Gap
Swing Over Cross-slide
Digital Readout System Fitted
Quick Change Toolpost Fitted
Coolant System
Tool Height To Suit
Centre Height
Spindle Nose Size or Type
D1-4 Camlock
Bed Width
Headstock Spindle Taper
Tailstock Taper
Cross Slide Travel
Compound Slide Travel
Cross Feed Range (X-Axis)
0.02 - 0.33mm/rev
Longitudinal Feed Range (Z-Axis)
0.07 - 1.29mm/rev
Metric Thread Steps & Pitch Range
36 (0.4 - 7mm)
Imperial Thread Steps & TPI Range
45 (4 - 60tpi)
3 Jaw Chuck Diameter
4 Jaw Chuck Diameter
Spindle Steps / Speed Range
9 (75 - 1400rpm)
Motor Power
1.5kW / 2hp
Weight (nett)
This new & improved AL-335F quality metal turning lathe and now includes a coolant system & foot brake for the serious enthusiastic home model engineer, general maintenance and small workshops. Featuring a precision ground, induction hardened bed, fully gear driven spindle with hardened and ground gears with a speed range of 75 - 1400rpm, selectable via the front of headstock mounted gear selection levers.

2hp single phase 240 volt motor is supplied on machine, taper roller spindle bearings, range of cross and longitudinal feed speeds selected on a separate gearbox, thread chasing dial, chuck guard with safety interlock, splash guard and work lamp.

Supplied with a large range of standard accessories including a 150mm(6") 3 jaw self centring chuck, 200mm(8") 4 jaw independent chuck, face plate and dead centres. 5 to 3 MT reduction sleeve, steady rest, follow rest, standard tool post, floor stand with a swarf tray. Change gears and toolbox with maintenance tools.
  • Gear driven headstock for quick change of spindle speeds
  • Foot operated spindle brake with safety cut out switch
  • Slide out front swarf tray for easy cleaning
  • Coolant pump system with flexible hose & nozzle
  • Precision V-beds are induction hardened and ground, incorporated with rigid webbed castings
  • Low voltage halogen work light
  • Change gears for metric and imperial thread cutting
  • Adjustable taper roller bearings support the spindle
  • 9 spindle speeds from 75 to 1400rpm
  • Saddle hand wheel mounted on right side of apron reducing swarf contacting the hand
  • Inching button is incorporated on the control panel for convenient spindle speed selection
  • Quick-action gearbox for thread cutting and auto feeding
  • D1-4 camlock spindle for quick and accurate chuck removal and safe reverse direction turning. ISO standard
  • External adjustable cross feed lead-screw nut
  • Powered longitudinal and cross feeds
  • Bed wipers on saddle
  • Removable gap bed-way for larger diameter jobs
  • Dual calibrated dials (except for saddle hand-wheel)
  • Chuck guard fitted with safety micro switch
  • Chuck & change gear guards are fitted with micro switches
  • Foot brake system
  • Coolant pump system
  • Slide out front swarf tray
  • Work light with flexible arm
  • 3-jaw chuck with reverse jaws
  • 4-jaw chuck
  • Face plate
  • Fixed steady
  • Travelling steady
  • Change gears
  • Dead centre
  • Thread-chasing dial
  • Rear splash guard & swarf tray
  • Safety chuck guard
  • Cabinet stand
  • Spanners
  • Tool box
  • Instruction booklet
Product Brochure
Instruction Manual
26.36 MB
  • AL-335F (L681)
Swing Over Bed
Distance Between Centres
Spindle Bore
Swing In Gap
Swing Over Cross-slide
Digital Readout System Fitted
Quick Change Toolpost Fitted
Leadscrew Covers Fitted
Taper Turning Attachment
Coolant System
Tool Height To Suit
Centre Height
Spindle Nose Size or Type
Bed Width
Headstock Spindle Taper
Tailstock Taper
Cross Slide Travel
Compound Slide Travel
Cross Feed Range (X-Axis)
Longitudinal Feed Range (Z-Axis)
Metric Thread Steps & Pitch Range
Imperial Thread Steps & TPI Range
3 Jaw Chuck Diameter
4 Jaw Chuck Diameter
Spindle Steps / Speed Range
Motor Power
Weight (nett)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.