HAFCO METALMASTERSchools / TAFE
TM-1730 Centre Lathe - with DRO
  • 1 of 18
    L630D
  • 2 of 18
    Safety Chuck Guard
  • 3 of 18
    Dual calibrated dial on Handle
  • 4 of 18
    Thread Chasing Dial
  • 5 of 18
    Fixed & travelling steadies with roller bearings
  • 6 of 18
    Adjustable 4 position length stop mechanism for accurate repetitive operation
  • 7 of 18
    Footbrake
  • 8 of 18
    High quality one piece Meehanite cast base increases rigidity
  • 9 of 18
    Headstock controls
  • 10 of 18
    Quick change toolpost
  • 11 of 18
    2 Axis digital readout system
  • 12 of 18
    Leadscrew covers
  • 13 of 18
    Lubrication pump for slide
  • 14 of 18
    Heavy duty tailstock
  • 15 of 18
    Saddle controls
  • 16 of 18
    Thread Chasing Dial
  • 17 of 18
    Saddle Controls
  • 18 of 18
    Thread Charts
Order Code: L630D
Schools / TAFE - TM-1730 Centre Lathe - with DRO (415V)
430 x 762mm
HAFCO METALMASTER
ORDER CODE
L630D
Model
Schools / TAFE TM-1730
Digital Readout
Tool To Suit
25mm
Distance Between Centres
762mm
Swing Over Bed
430mm
Swing Over Gap
650mm
Swing Over Cross-slide
235mm
Centre Height
215mm
Spindle Bore
58mm
Camlock Spindle Size
D1-6
Bed Width
300mm
Head Stock Spindle Taper
6MT
Tail Stock Taper
4MT
Cross Slide Travel
250mm
Compound Slide Travel
125mm
Lead Screw
Metric
Cross Feed
0.02-0.4mm/rev
Longitudinal Feed
0.05-0.82mm/rev
Metric Thread Range
17 (0.5-7mm)
Imperial Thread Range
39 (4-56TPI)
3 Jaw Chuck ø
230mm
4 Jaw Chuck ø
250mm
Spindle Steps/speeds
12 (20-2000rpm)
Motor Power
3.75kW / 5HP
Voltage
415V
Weight (nett)
1650kg
Description
Manufactured in Taiwan

We for many years have been working in close consultation with education departments to ensure the most suitable equipment is provided to our schools and TAFE, not only does it comply with the departments stringent safety requirements but is built to last the distance. That's why we consider our company to be a specialist when it comes to supplying quality Wood Work and Metal Working Machinery for Public or Private Schools, TAFE Colleges and Trade Training Centres in all states of Australia.

The TM-1730 is manufactured in Taiwan with all the safety features needed to comply with the education department. This machine has the following safety features such as leadscrew cover, Chuck guard with micro switch, travelling toolpost guard, micro switch fitted to side access door and emergency foot brake making this machine superior in safety to protect the learning and developing students.
Features
  • 2 axis digital readout system
  • Triple bearings supporting headstock spindle
  • Adjustable taper roller bearings providing spindle accuracy
  • Precision 'V'-beds & headstock gears are all hardened & ground
  • High quality one-piece Meehanite cast base increases rigidity
  • Chuck guard with safety micro switch cut out
  • Travelling toolpost guard deflects swarf into tray
  • Quick change toolpost with additional holders
  • Leadscrew cover ensures swarf not reaching clasp nut
  • Overload protection on drive motor and coolant system
  • Universal enclosed gearbox incorporating metric & imperial thread capabilities
  • Inching button incorporated on the control panel for convenient spindle speed selection
  • Foot operated spindle brake with safety cut out switch
  • 300mm wide induction hardened heavy duty cast iron bed
  • Removable gap bed allowing work piece to swing up to 650mm
  • Powered longitudinal and cross feeds
  • Adjustable 4 position length-stop mechanism for accurate repetitive operation
  • Dual calibrated dials incorporating metric & imperial graduations
  • Coolant system with flexible hose enabling operator to manipulate flow direction
  • Oil sight glass for head stock, gearbox and apron
  • Low voltage halogen work light
  • Lubrication pump on saddle oiling slides
  • D1-6 camlock spindle for quick chuck removal
  • 12 Spindle speeds from 20 - 2000rpm
  • Large 58mm spindle bore
  • 3.75kW / 5HP 415V main motor
Includes
  • 230mm 3-jaw chuck with reverse jaws
  • 250mm 4-jaw chuck
  • Faceplate
  • Fixed Steady with roller bearings
  • Travelling steady with roller bearings
  • 4-position knock out feed system
  • Chuck guard
  • Travelling toolpost guard
  • Dead centres
  • Thread chasing dial
  • Foot brake
  • Coolant system
  • Work light
  • Rear splash guard
  • Spindle reducing bush
  • Instruction booklet
Product Brochure
 
Enter your postcode to estimate the delivery fee for this product.
Postcode:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  •   (L630D)
ORDER CODE
NSW Contract No.
QLD Contract No.
Model
 
Digital Readout
Tool To Suit
Distance Between Centres
Swing Over Bed
Swing Over Gap
Swing Over Cross-slide
Centre Height
Spindle Bore
Camlock Spindle Size
Bed Width
Head Stock Spindle Taper
Tail Stock Taper
Cross Slide Travel
Compound Slide Travel
Lead Screw
Cross Feed
Longitudinal Feed
Metric Thread Range
Imperial Thread Range
3 Jaw Chuck ø
4 Jaw Chuck ø
Spindle Steps/speeds
Motor Power
Voltage
Weight (nett)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.