HAFCO METALMASTERAL-1324
Centre Lathe
  • 1 of 12
    L201
  • 2 of 12
    Safety Chuck Guard
  • 3 of 12
    Sliding drip tray for swarf removal
  • 4 of 12
    Footbrake
  • 5 of 12
    Leadscrew Covers
  • 6 of 12
    Leadscrew Covers
  • 7 of 12
    Headstock Controls
  • 8 of 12
    Limit Switch
  • 9 of 12
    Saddle Controls
  • 10 of 12
    Thread Chasing Dial
  • 11 of 12
    Toolbox
  • 12 of 12
    Feed Charts
Order Code: L201D
AL-1324 - Centre Lathe (415V)
330 x 600mm Turning Capacity - 40mm Bore
Includes Digital Readout
HAFCO METALMASTER
ORDER CODE
L201D
Model
AL-1324
Digital Readout System Fitted
Quick Change Toolpost Fitted
Optional
Leadscrew Covers Fitted
Taper Turning Attachment
Optional
Coolant System
Tool Height To Suit
16mm
Distance Between Centres
600mm
Swing Over Bed
330mm
Swing Over Cross-slide
200mm
Centre Height
165mm
Spindle Bore
40mm
Spindle Nose Size or Type
D1-4 Camlock
Bed Width
190mm
Headstock Spindle Taper
5MT
Tailstock Taper
3MT
Cross Slide Travel
175mm
Compound Slide Travel
100mm
Leadscrew
Metric
Cross Feed Range (X-Axis)
0.034~0.468mm/rev
Longitudinal Feed Range (Z-Axis)
0.068~0.936mm/rev
Metric Thread Steps & Pitch Range
30(0.4-7.0mm)
Imperial Thread Steps & TPI Range
32(4-56TPI)
3 Jaw Chuck Diameter
160mm
4 Jaw Chuck Diameter
200mm
Spindle Steps / Speed Range
9 (82-2000rpm)
Motor Power
2.25kW / 3HP
Voltage
415V
Weight (nett)
660kg
Description
Manufactured in Taiwan
Features
  • Tool room quality precision lathe, Made in Taiwan and have been sold for over 20 years
  • 2-Axis digital readout system fitted
  • Gear drive headstock for quick change of spindle speeds
  • Stand increasing rigidity and reducing vibration
  • Precision 'V'-beds are hardened and ground, incorporating a rigid webbed casting
  • Foot operated spindle brake with safety cut out switch
  • Slide out front swarf tray for easy cleaning
  • Chuck guard fitted fitted with micro switch
  • Leadscrew cover ensures swarf not reaching clasp nut
  • Change gears for metric and imperial thread cutting
  • Oil sight glass for head stock and gearbox
  • Adjustable taper roller bearings support the spindle
  • Overload clutch mechanism on auto power feed
  • Overload protection on drive motor and coolant system
  • 3HP/415V motor, 9-speed (82 - 2000rpm)
  • Enclosed quick action gearbox for thread cutting and auto feeding
  • Powered longitudinal and cross feeds
  • D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
  • Dual calibrated dials
  • Coolant system with flexible hose
  • Slide out swarf tray
Includes
  • 2-Axis digital readout system fitted
  • 3-jaw chuck with reverse jaws
  • 4-jaw chuck
  • Faceplate
  • Fixed Steady
  • Travelling steady
  • Chuck guard
  • Concertina leadscrew covers
  • Slide out front swarf tray
  • Dead centre
  • Thread chasing dial
  • Foot brake
  • Coolant system
  • Rear splash guard
  • Instruction booklet
Product Brochure
 
Instruction Manual
5.56 MB
Enter your postcode to estimate the delivery fee for this product.
Postcode:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • AL-1324 (L201D)
ORDER CODE
Model
Digital Readout System Fitted
Quick Change Toolpost Fitted
Leadscrew Covers Fitted
Taper Turning Attachment
Coolant System
Tool Height To Suit
Distance Between Centres
Swing Over Bed
Swing Over Cross-slide
Swing In Gap
Centre Height
Spindle Bore
Spindle Nose Size or Type
Bed Width
Headstock Spindle Taper
Tailstock Taper
Cross Slide Travel
Compound Slide Travel
Leadscrew
Cross Feed Range (X-Axis)
Longitudinal Feed Range (Z-Axis)
Metric Thread Steps & Pitch Range
Imperial Thread Steps & TPI Range
3 Jaw Chuck Diameter
4 Jaw Chuck Diameter
Spindle Steps / Speed Range
Motor Power
Voltage
Weight (nett)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.
Parts List
1.88 MB