HAFCO METALMASTERAL-250G
Bench Lathe
  • 1 of 27
    L149
  • 2 of 27
    AL250G Bench Lathe
  • 3 of 27
    Headstock Controls
  • 4 of 27
    Speed Selection Lever
  • 5 of 27
    Feed and Threading Gearbox Levers
  • 6 of 27
    Key Lockable Side Pulley Door
  • 7 of 27
    Hardened and Ground Bed
  • 8 of 27
    Safety Chuck Guard with Micro
  • 9 of 27
    Saddle Front View
  • 10 of 27
    Saddle
  • 11 of 27
    Compound Table with Safety Guard
  • 12 of 27
    4 Way Toolpost
  • 13 of 27
    Swivel Compound Slide
  • 14 of 27
    Thread Chasing Dial
  • 15 of 27
    Feed and Thread Engagement Levers
  • 16 of 27
    Leadscrew Cover
  • 17 of 27
    Tailstock
  • 18 of 27
    Tailstock Horizontal Adjustment
  • 19 of 27
    Tailstock Quill Graduations
  • 20 of 27
    Tailstock Hand Wheel
  • 21 of 27
    Cross Feed Hand Wheel
  • 22 of 27
    Compound Slide Hand Wheel
  • 23 of 27
    Saddle Hand Wheel Graduations
  • 24 of 27
    Fixed 2 Point Steady
  • 25 of 27
    3 Point Travelling Steady
  • 26 of 27
    Micro Switch Fitted To Pulley Cover
  • 27 of 27
    Forward Reverse Switch with Emergency Stop
Order Code: L149
AL-250G - Bench Lathe (240V)
250 x 500mm Turning Capacity
HAFCO METALMASTER
ORDER CODE
L149
MODEL
AL-250G
Swing Over Bed (mm)
250
Distance Between Centres (mm)
500
Spindle Bore (mm)
26
Swing Over Cross-slide (mm)
150
Digital Readout System Fitted
Optional
Quick Change Toolpost Fitted
Optional
Leadscrew Covers Fitted
Tool Height To Suit (mm)
16
Centre Height (mm)
125
Spindle Nose Size or Type
Fixed
Bed Width (mm)
140
Headstock Spindle Taper (MT)
4
Tailstock Taper (MT)
3
Cross Slide Travel (mm)
145
Compound Slide Travel (mm)
75
Leadscrew Type
Metric
Metric Cross Feed (X-Axis) (mm/rev)
0.017 - 0.187
Metric Longitudinal Feed (Z-Axis) (mm/rev)
0.035 - 0.375
Metric Thread Steps & Pitch (No. / mm)
15 (0.25 - 2.5)
3 Jaw Chuck Diameter (mm)
130
4 Jaw Chuck Diameter (mm)
Optional
Spindle Steps / Speeds (No. / rpm)
12 (80 - 1600)
Motor Power (kW / hp)
0.75 / 1
Voltage / Amperage (V / amp)
240 / 10
Nett Weight (kg)
180
Features
  • 12 spindle speed geared headstock incorporates a single progression dial
  • 26mm spindle bore
  • Hardened and ground bed
  • Enclosed quick action gearbox for thread cutting & auto feeding
  • Adjustable taper roller spindle bearings
  • Metric thread cutting
  • Powered longitudinal and cross feeds
  • Headstock and gearbox oil sight glass
  • Metric thread chasing dial
  • Quick action tailstock locking lever
  • Forward/reverse spindle switch
  • 0.75kW / 1hp 240V motor
Includes
  • 130mm 3-jaw chuck with reverse jaws
  • Face plate
  • Fixed steady
  • Travelling steady
  • Dead centre
  • Rear splash guard & swarf tray
  • Safety chuck guard
  • Leadscrew Cover
  • Instruction booklet
Optional Accessories
  • PLEASE NOTE: Quick Change Toolpost,
  • L292, will accept 16mm turning tools but 16mm boring bar WONT fit on this machine
  • L280, will accept 12mm turning tools and 12mm boring bar WILL fit on this machine

Product Brochure
 
Instruction Manual
3.38 MB
Select your Postcode & Suburb to estimate the delivery fee for this product.
Postcode & Suburb:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • AL-250G (L149)
ORDER CODE
MODEL
Swing Over Bed (mm)
Distance Between Centres (mm)
Spindle Bore (mm)
Swing In Gap (mm)
Swing Over Cross-slide (mm)
Digital Readout System Fitted
Quick Change Toolpost Fitted
Leadscrew Covers Fitted
Taper Turning Attachment
Coolant System
Tool Height To Suit (mm)
Centre Height (mm)
Spindle Nose Size or Type
Bed Width (mm)
Headstock Spindle Taper (MT)
Tailstock Taper (MT)
Cross Slide Travel (mm)
Compound Slide Travel (mm)
Leadscrew Type
Metric Cross Feed (X-Axis) (mm/rev)
Imperial Cross Feed (X-Axis) (inch/rev)
Metric Longitudinal Feed (Z-Axis) (mm/rev)
Imperial Longitudinal Feed (Z-Axis) (inch/rev)
Metric Thread Steps & Pitch (No. / mm)
Imperial Thread Steps & TPI (No. / TPI)
3 Jaw Chuck Diameter (mm)
4 Jaw Chuck Diameter (mm)
Spindle Steps / Speeds (No. / rpm)
Motor Power (kW / hp)
Voltage / Amperage (V / amp)
Nett Weight (kg)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.
Parts List
1.57 MB