THIS PRODUCT IS NO LONGER AVAILABLE. Click to see similar products > Milling Machines
HM-46 Mill Drill Machine - Includes Tooling Package
  • 1 of 21
  • 2 of 21
    Forward and Reverse On Off Switch
  • 3 of 21
    Spindle Speed Selectors
  • 4 of 21
    Spindle lock for quill
  • 5 of 21
    Quill Depth Scale
  • 6 of 21
    Fine Feed Handwheel Operating Quill Feed
  • 7 of 21
    Speed Chart
  • 8 of 21
    Face Mill Cutter
  • 9 of 21
    Rack and Pinion Wind Up Head
  • 10 of 21
    Large 730mm x 210mm ground work table with T Slots
  • 11 of 21
  • 12 of 21
    Tilting head
  • 13 of 21
    Head Controls
  • 14 of 21
    Dovetailed Vertical Z Axis
  • 15 of 21
    Table Cross Feed Handle
  • 16 of 21
    Table Longitudinal Handle
  • 17 of 21
    Includes These Accessories
  • 18 of 21
    Tilt Head Front View
  • 19 of 21
    Head Shown in Vertical Position
  • 20 of 21
    Left View
  • 21 of 21
    Shown mounted to Optional Stand
Order Code: K8740
QLD Schools / TAFE - HM-46 Mill Drill Machine - Includes Tooling Package (415V)
(X) 475mm (Y) 195mm (Z) 450mm
QLD Contract Item No. 16.1
QLD Contract No.
QLD Item No. 16.1
Schools / TAFE HM-46
Digital Readout
Drilling Capacity
End Milling Capacity
Face Milling Capacity
Spindle Taper
Quill Travel / Diameter
120mm / 75mm
Spindle to Table
Type of Slides
Spindle to Column
Table Size
730 x 210mm
Longitudinal Travel (X-Axis)
Cross Travel (Y-Axis)
Vertical Travel (Z-Axis)
Work Table Load Capacity
Swivel Head (Left - Right)
Quill Feed Rate/Rev
Spindle Speeds (Vertical)
Motor Power (Vertical)
Motor Voltage
Weight (nett)
We for many years have been working in close consultation with education departments to ensure the most suitable equipment is provided to our schools and TAFE, not only does it comply with the departments stringent safety requirements but is built to last the distance. That's why we consider our company to be a specialist when it comes to supplying quality Wood Work and Metal Working Machinery for Public or Private Schools, TAFE Colleges and Trade Training Centres in all states of Australia.

The HM-46 milling machines is similar in overall size to the popular RF-31 or HM-32 but with the additional benefit of a 6-speed 95-1600rpm, gear driven head which can be tilted up to 90º either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out.

The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling.

The motor is controlled by a standard forward and reverse on/off switch.

Also available is a optional power feed attachment which fits to the left hand end of the table and provides a smooth, variable speed longitudinal drive.
  • Gear driven head 6 speeds
  • Dovetail vertical Z-axis
  • Tilting head to ±90º from vertical
  • Large 730mm x 210mm ground work table with T-slots
  • Adjustable leadscrew nuts eliminating backlash on both axis
  • Fine feed handwheel operating quill feed
  • Forward and reverse on/off switch
  • 3MT spindle with 75mm diameter quill
  • Adjustable table and drill length stops
  • Rack and pinion wind-up head
  • Rear slide-way cover and slide clamps on all axis
  • Spindle lock for quill
  • Table lock on both Axis
  • Metric dial graduations @ 0.05mm for X & Y axis
  • Machine stand
  • Digital tilting head gauge
  • Halogen light
  • Safety cutter guard
  • 125mm Machine Vice (V105)
  • 75mm Face Mill Cutter (M512)
  • MT3 x 27mm Face Mill Arbor (M563)
  • Pkt of 10 Milling Inserts (L066)
  • MT3 x 6 Piece Collet Chuck Set (C922B)
  • 6-20mm Metric End Mill & Slot Drill Set (M330)
  • 10mm T Slot Cutter (M3280)
  • 12mm T Slot Cutter (M3281)
  • 14mm Clamp Kit (C096)
  • 16mm Keyless Drill Chuck (C294)
  • MT3 Drill Chuck Arbor (D443A)
  • 100mm- BS-0 Dividing Head (D001)
  • 125mm 3 Jaw Lathe Chuck (C202)
Product Brochure
Spare Parts Ordering
To assist you in ordering your spare part quicker than ever before, we have listed our most common spare parts to suit our Hafco Machinery for purchase online. Just choose between the 2 options outlined below, to find exactly what you are looking for. If you need further assistance please contact us.
Option 1
Browse through the "Common Spare Parts" tab below . Once you have identified your part, you can add it to your cart by clicking on the "+ ADD TO CART" button. If you wish to add multiples of this part you can either click the "+ ADD TO CART" button as many times as you like or click on the "VIEW CART" button and change the order quantity, prior to completing your order.
Option 2
If your part is NOT listed in the "Common Spare Parts" tab below , click the "MORE INFO" button to complete the "Spare Parts Enquiry Form".
This will provide you with the option to email your spare part enquiry direct to our Spare Parts and Service Department, or if you wish, you can download a printable version of this enquiry form which will include a copy of the Parts List to suit this machine (if available). Further instructions for the return email address or fax number of this printable form is provided on the document for your convenience.
NOTE: Please remember to clearly identify your part on the included parts diagram if necessary so that we can respond as quickly as possible with a price and availability for the part(s) you require.