THIS PRODUCT IS NO LONGER AVAILABLE. Click to see recommended item > M162D (HM-53GV)
HAFCO METALMASTERHM-52G
Turret Milling Machine Geared Head Horizontal - Vertical
  • 1 of 21
    K026
  • 2 of 21
    Control Panel
  • 3 of 21
    Right View
  • 4 of 21
    Horizontal Setup
  • 5 of 21
    X Axis Power Feed with Rapid
  • 6 of 21
    Horizontal Speed Spindle Chart
  • 7 of 21
    Horizontal Spindle
  • 8 of 21
    Horizontal Spindle Support
  • 9 of 21
    Horizontal Milling Setup
  • 10 of 21
    Geared Head Spindle Speed Selectors
  • 11 of 21
    Quill Controls
  • 12 of 21
    Spindle Controls
  • 13 of 21
    Swivel Table
  • 14 of 21
    Tilting Head Scale
  • 15 of 21
    Speed Chart
  • 16 of 21
    Concertina Slide Way Cover
  • 17 of 21
    Knee Feed Handle
  • 18 of 21
    Halogen Light
  • 19 of 21
    Coolant Nozzel
  • 20 of 21
    Coolant Pump
  • 21 of 21
    Horizontal Milling Accessories
Order Code: K026
HM-52G - Turret Milling Machine Geared Head Horizontal - Vertical (415V)
(X) 600mm (Y) 200mm (Z) 340mm
Includes Digital Readout
HAFCO METALMASTER
ORDER CODE
K026
Model
HM-52G
Digital Readout
3-Axis Digital Readout
Type
Vertical & Horizontal
Table Size
1000 x 240mm
Spindle Taper - Vertical
NT30
Spindle Taper - Horizontal
NT30
Longitudinal Travel (X-Axis)
600mm *
Cross Travel (Y-Axis)
200mm *
Vertical Travel (Z-Axis)
340mm
Type of Slides
Dovetail
Ram Travel
500mm
Spindle to Table
375mm
Quill Travel / Diameter
125mm / 90mm
Throat Depth (max.)
640mm
Tilting Head (Left ~ Right)
±90º
Tilting Head (Forward ~ Back)
Fixed
Power Feed - Quill
Manual
Power Feed - Longitudinal (X-Axis)
20 - 2000 mm/min
Power Feed - Cross (Y-Axis)
Optional
Power Feed - Vertical (Z-Axis)
Optional
Table T-Slot Size
14mm
Work Table Load Capacity
175kg
Spindle Speeds Vertical (steps/rpm)
8 (115-1750rpm)
Spindle Speeds Horizontal (steps/rpm)
9 (60-1350rpm)
Motor Power - Vertical
1.5kW / 2hp
Motor Power - Horizontal
1.5kW / 2hp
Motor Voltage
415V
Overall Height
2060mm
Weight (nett)
1050kg
Description
A well-built entry level geared head, turret milling, vertical and horizontal, drilling machine with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 220mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. Two levers mounted on right side of milling head enables quick change off the geared spindle speeds.

Other features include 3 axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Extra Features:
New design pendant control
Swivel table
2 Arbors for the horizontal spindle
Features
  • 3 Axis digital readout system
  • Pendant control on swivelling arm
  • Swivel table & two arbors for the horizontal spindle
  • Mill head tilts to ±90º left to right
  • 340mm horizontally sliding and rotating ram
  • NT30 Horizontal and vertical spindles that are hardened and ground
  • Precision-ground dovetail slide-ways and table
  • Precision milling table incorporating machined T slots
  • Rear concertina slide-way cover
  • Forward and reverse on/off switch
  • Fine hand wheel operated quill feed
  • Swarf & splash tray
  • Spindle lock for quill
  • Metric dial graduations @ 0.02mm for X , Y & Z-Axis
  • Vertical dial graduations on hand wheel @ 0.05mm
  • All slides utilise dovetail construction for maximum rigidity

  • * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
Includes
  • 3 Axis digital readout system
  • X-Axis power-feed
  • Safety cutter guard
  • Swarf tray
  • Coolant system
  • Halogen lamp
  • Drill chuck & arbor
  • 2 & 3MT adaptors
  • 8-piece metric collet chuck set (4-16mm)
  • 2 Arbors for the horizontal spindle
Product Brochure
 
Spare Parts Ordering
To assist you in ordering your spare part quicker than ever before, we have listed our most common spare parts to suit our Hafco Machinery for purchase online. Just choose between the 2 options outlined below, to find exactly what you are looking for. If you need further assistance please contact us.
Option 1
Browse through the "Common Spare Parts" tab below . Once you have identified your part, you can add it to your cart by clicking on the "+ ADD TO CART" button. If you wish to add multiples of this part you can either click the "+ ADD TO CART" button as many times as you like or click on the "VIEW CART" button and change the order quantity, prior to completing your order.
Option 2
If your part is NOT listed in the "Common Spare Parts" tab below , click the "MORE INFO" button to complete the "Spare Parts Enquiry Form".
This will provide you with the option to email your spare part enquiry direct to our Spare Parts and Service Department, or if you wish, you can download a printable version of this enquiry form which will include a copy of the Parts List to suit this machine (if available). Further instructions for the return email address or fax number of this printable form is provided on the document for your convenience.
NOTE: Please remember to clearly identify your part on the included parts diagram if necessary so that we can respond as quickly as possible with a price and availability for the part(s) you require.