Industrial 4MT Geared Head Drilling Machine - GHD-50

Includes Automatic Feed & Tapping

D178 1 of 27

Left View 2 of 27

Rear View 3 of 27

Drill Head 4 of 27

Adjustable Drill Depth Stop 5 of 27

Digital Spindle Speed Display 6 of 27

Digital Readout For Drill Depth 7 of 27

Drill Speed Selection Levers & Speed Chart 8 of 27

Interlocked Spindle Safety Guard 9 of 27

Keyed Drill Chuck 10 of 27

Quill Handle with Auto Feed Buttons 11 of 27

Tool Setting Dismounting 12 of 27

T Slotted Table and Base 13 of 27

Work Table 14 of 27

Work Table Rotates and Swivels 15 of 27

Tilting Table Scale 16 of 27

Table Lock with Micro 17 of 27

Motorised Table Height with Manual Handle 18 of 27

Coolant System 19 of 27

Fine Feed Drilling Dial 20 of 27

Quill Locking Handle 21 of 27

Drill Feed Lever 22 of 27

Work Light 23 of 27

Coolant Nozzle 24 of 27

4hp Motor 25 of 27

Control Switches 26 of 27

Parts Included 27 of 27

Description

Ø50mm Drilling Capacity

Includes Automatic Feed & Tapping

Ideal for industrial workshop use
Geared head drilling machine with 4 morse taper spindle
Automatic feed range (0.1, 0.2, 0.3, 0.40mm/rev)
Thread tapping with auto reverse
Spindle incorporates automatic spindle brake
12 drilling speeds from 52-1400rpm
Digital readout spindle speed mounted on front panel
Digital readout depth gauge mounted on front panel (Includes LR44 battery)
Interlocked spindle safety guard
Drill ejector incorporated in machine
Coolant pump system with flexible hose
Work light mounted in convenient location
50mm drill capacity with 240mm of spindle travel
Oil sight glass for geared head and feed gearbox
Modern electrics to European CE standards
Forward and reverse spindle switch with high and low speeds
Emergency stop switch and overload protection
Substantial heavy walled column ensuring greater rigidity
Adjustable accurate depth setting with auto feed cut out for increased productivity
T slotted work table and base
200kg table load capacity
Square work table tilts to ±45º and rotates 360º
Motorised rise & fall work table
52rpm low speed for heavy drilling

Specifications

ORDER CODE	D178
MODEL	GHD-50
(mm)Drilling Capacity	Ø50
(Metric)Thread Tapping Capacity	M30
(MT)Spindle Taper	4
(mm)Spindle Travel	240
(mm)Throat Depth	360
(mm)Quill Diameter	80
(mm)Column Diameter	180
(mm)Spindle To Table	485
(mm)Spindle To Base	1095
(Type)Table	Rectangle
(mm)Table Size	460 x 580
(mm)T-Slot Size	14
(mm/rev)Automatic Quill Feed	0.1, 0.2, 0.3, 0.40
(Includes)Work Light	Yes
(Includes)Coolant System	Yes
(No.)Spindle Speed Steps	12
(rpm)Spindle Speed Range	52 ~ 1400
(kW / hp)Motor Power	3 / 4
(V / amp)Voltage / Amperage	415
(mm)Full Height	2350
(kg)Nett Weight	710