Swivel Head Metal Cutting Band Saw
  • 1 of 21
  • 2 of 21
    Head Shown At 45 Degrees
  • 3 of 21
    Rear View
  • 4 of 21
    Swivel Head to 45 Degrees
  • 5 of 21
    Swivel Vice At 45 Degrees
  • 6 of 21
    Control Panel
  • 7 of 21
    Laser Light Guide
  • 8 of 21
    Laser Cut Line Guide
  • 9 of 21
    Variable Blade Speed
  • 10 of 21
    Blade Tension Gauge
  • 11 of 21
    Blade Tension Mechanism
  • 12 of 21
    Swivel Vice
  • 13 of 21
    Quick Clamp & Release Vice
  • 14 of 21
    Length Stop
  • 15 of 21
    Cast Iron Blade Wheels
  • 16 of 21
    Carbide Blade Guides with Bearings
  • 17 of 21
    Blade Cleaning Brush
  • 18 of 21
    Hydraulic Ram
  • 19 of 21
    Automatic Electric Cut Out Switch
  • 20 of 21
    Coolant Shut Off Valve
  • 21 of 21
    Coolant System
Order Code: B021
BS-10LS - Swivel Head Metal Cutting Band Saw (415V)
468 x 250mm (W x H) Rectangle Capacity
On Special - Ends 30th June 2017
ex GST
inc GST

Operation Type
Swivel Head
Round @ 90º (mm)
Round @ 45º (mm)
Square @ 90º (mm)
Square @ 45º (mm)
Rectangle (W x H) @ 90º (mm)
468 x 250
Rectangle (W x H) @ 45º (mm)
250 x 240
Coolant System
Table Working Height (mm)
Cutting Head Beam Type
Cutting Head Beam Return
Manual Return
Cutting Head Down Feed Control
Adjustable Hydraulic
Vice Clamping Fixture
Blade Steps / Speeds (m/min)
Variable 18-102
Blade Size (L x W x T) (mm)
3090 x 27 x 0.9
Motor Power (kW / hp)
1.5 / 2
Voltage / Amperage (V / amp)
Nett Weight (kg)
Manufactured in Taiwan

The BS-10LS heavy duty metal cutting band saw has many features on offer with a swivel base to cut mitres up to 45 degrees, variable speed control, hydraulic feed control a cutting capacity of up to 250mm diameter or 468 x 250mm in steel at 90º and two ball bearings per side on the blade guides for optimal control and accuracy. There is a choice of blade speeds via an adjustable dial system so that the cutting speed can be changed to suit a wide range of materials, whilst the built-in coolant system ensures maximum cutting efficiency and longer blade life. Both blade control arms are adjustable, allowing them to be positioned as close to the cut as possible. This means reliably and accurate cuts!

The cutting operation works automatically with the weight of the head providing the cutting force and a limit switch shutting the machine down when the cut is complete. The weight of the head is counterbalanced by an adjustable hydraulic damper to control the feed rate, an excellent machine choice for maintenance shops, steel fabrications, and engineering workshops. . If you're looking for this size range of machine, you'll have a tough time finding a better metal-cutting band saw with these features and at this price, It represents excellent value.
  • 468 x 250mm (W x H) rectangular capacity
  • Swivel head for easy angle cutting without moving material
  • Adjustable hydraulic feed cutting rate for multiple applications
  • Mitre cuts to 45º using swivel head
  • Built-in coolant system for maximum cutting efficiency
  • Laser line guide assist in lining up material positioning
  • Limit switch stops machine when cut is complete
  • Control panel located on top of arm for easy use
  • Combination roller bearing & Carbide blade guides
  • Coolant system with flow control valve
  • Large mitre scale - easy to read
  • Cast iron frame with heavy duty fabricated base
  • Quick action material clamping system
  • Adjustable blade roller guides provides accurate cutting
  • Variable speed drive system changes blade speed from 18-102mpm
  • Adjustable length stop for repetition cutting
  • Automatic electric cut-out switch
  • Wire wheel brush to clean swarf from blade
  • Heavy-duty gearbox drive
  • Heavy-duty 1.5kW 415V fully enclosed fan-cooled motor
Product Brochure
Instruction Manual
2.06 MB
Blade Selection Chart
381.95 KB
Trouble Shooting Guide
330.4 KB
Enter your postcode to estimate the delivery fee for this product.
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • BS-10LS (B021)
Operation Type
Round @ 90º (mm)
Round @ 45º (mm)
Round @ 60º (mm)
Square @ 90º (mm)
Square @ 45º (mm)
Square @ 60º (mm)
Rectangle (W x H) @ 90º (mm)
Rectangle (W x H) @ 45º (mm)
Rectangle (W x H) @ 60º (mm)
Coolant System
Table Working Height (mm)
Cutting Head Beam Type
Cutting Head Beam Return
Cutting Head Down Feed Control
Vice Clamping Fixture
Bundle Cutting Fixture
Blade Steps / Speeds (m/min)
Blade Size (L x W x T) (mm)
Motor Power (kW / hp)
Voltage / Amperage (V / amp)
Nett Weight (kg)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.
Parts List
877.94 KB