HAFCO METALMASTERBS-916A
Metal Cutting Band Saw
  • 1 of 21
    B015
  • 2 of 21
    Right View
  • 3 of 21
    Left View
  • 4 of 21
    Rear View
  • 5 of 21
    Front View Head Fully Up
  • 6 of 21
    Front View Head Fully Down
  • 7 of 21
    Control Panel
  • 8 of 21
    Quick Adjustment Blade Guide System
  • 9 of 21
    Carbide Blade Guides With Bearings
  • 10 of 21
    Blade Cleaning Brush
  • 11 of 21
    Vice At 0 Degrees
  • 12 of 21
    Vice At 45 Degrees
  • 13 of 21
    Blade Tension Mechanism
  • 14 of 21
    Blade Tension Scale
  • 15 of 21
    Coolant Shut Off Valve
  • 16 of 21
    Length Stop
  • 17 of 21
    Blade Guard Safety Micro Switch on Left Side
  • 18 of 21
    Blade Guard Safety Micro Switch on Right Side
  • 19 of 21
    Speed Selection Chart
  • 20 of 21
    Hydraulic Arm With Automatic Cut Out Switch
  • 21 of 21
    Coolant System
Order Code: B015
BS-916A - Metal Cutting Band Saw (240V)
350 x 228mm (W x H) Rectangle Capacity
HAFCO METALMASTER
ORDER CODE
B015
MODEL
BS-916A
Operation Type
Fixed Head
Round @ 90º (mm)
228
Round @ 45º (mm)
180
Square @ 90º (mm)
228
Square @ 45º (mm)
150
Rectangle (W x H) @ 90º (mm)
350 x 228
Rectangle (W x H) @ 45º (mm)
180 x 150
Coolant System
Table Working Height (mm)
675
Cutting Head Beam Type
Manual
Cutting Head Beam Return
Manual Return
Cutting Head Down Feed Control
Adjustable Hydraulic
Vice Clamping Fixture
Manual
Blade Steps / Speeds (m/min)
25-40-52-72
Blade Size (L x W x T) (mm)
2908 x 27 x 0.9
Motor Power (kW / hp)
1.1 / 1.5
Voltage / Amperage (V / amp)
240 / 15
Nett Weight (kg)
290
Description
Manufactured in Taiwan

The BS-916A is a largest 240 volt band saw suitable for the medium/heavy fabrication and general engineering workshops. It features increased motor power, four blade speeds, double row ball bearing blade guides, a built-in coolant system, quick action sliding vice and greatly increased cutting capacity

The downward cutting pressure is controlled by a fully adjustable hydraulic damper with an on/off valve and there is an automatic cut-off at the end of the cut. The vice rotates for mitre cutting and there is an adjustable material stop for consistent repeat length cutting.
Features
  • 350 x 228mm (W x H) rectangular capacity
  • Adjustable hydraulic feed cutting rate for multiple applications
  • Mitre cuts to 45º using calibrated vice
  • Built-in coolant system for maximum cutting efficiency
  • Limit switch stops machine when cut is complete
  • Control panel located on top of arm for easy use
  • Coolant system with flow control valve
  • Cast iron frame with heavy duty fabricated base
  • Quick action material clamping system
  • Blade tension lever with scale for optimum settings
  • Combination roller bearing & carbide blade guides
  • Adjustable 4-speed pulley drive system enabling 25-40-52-72mpm cutting speeds
  • Adjustable length stop for repetition cutting
  • Automatic electric cut-out switch
  • Wire wheel brush to clean swarf from blade
  • Heavy-duty gearbox drive
  • Heavy-duty 1.1kW 240V fully enclosed fan-cooled motor
Product Brochure
 
Instruction Manual
6.88 MB
Blade Selection Chart
381.95 KB
Trouble Shooting Guide
330.4 KB
Select your Postcode & Suburb to estimate the delivery fee for this product.
Postcode & Suburb:
Freight is estimated from the nearest branch that has stock available.
Our delivery contractors operate Monday to Friday only, excluding public holidays.
All orders are processed in order of payment receipt.
Our aim is to despatch your goods as quickly as possible, however despatch times may take longer than our standard 3 to 5 day service during peak periods or according to stock levels, if this is the case we will advise you before processing your order.
More questions? Visit our delivery information page

  • BS-916A (B015)
ORDER CODE
MODEL
Operation Type
Round @ 90º (mm)
Round @ 45º (mm)
Round @ 60º (mm)
Square @ 90º (mm)
Square @ 45º (mm)
Square @ 60º (mm)
Rectangle (W x H) @ 90º (mm)
Rectangle (W x H) @ 45º (mm)
Rectangle (W x H) @ 60º (mm)
Coolant System
Table Working Height (mm)
Cutting Head Beam Type
Cutting Head Beam Return
Cutting Head Down Feed Control
Vice Clamping Fixture
Bundle Cutting Fixture
Blade Steps / Speeds (m/min)
Blade Size (L x W x T) (mm)
Motor Power (kW / hp)
Voltage / Amperage (V / amp)
Nett Weight (kg)
Price (ex GST)
Price (inc GST)

Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.
Parts List
1.2 MB